Sony DXC-D35 User Manual
Chapter 2 Fitting and Connections
Chapter 2 Fitting and Connections
27
Using the Camcorder Grip
When using the camera head with a VTR as a
camcorder, you can replace the camera head’s grip
with a camcorder grip (not supplied). The type of
camcorder, you can replace the camera head’s grip
with a camcorder grip (not supplied). The type of
camcorder grip and the method for attaching it differ
slightly depending on the type of VTR.
slightly depending on the type of VTR.
Attaching a camcorder grip to the DSR-1/1P
1
If the viewfinder is attached,
adjust the viewfinder to the
full-forward position.
full-forward position.
For details, see “Adjusting the
viewfinder position” on page 32.
viewfinder position” on page 32.
2
Remove the camera head
grip’s three screws, then pull
up the grip to remove it.
grip’s three screws, then pull
up the grip to remove it.
3
Remove the VTR connection
plate.
plate.
4
Remove the DSR-1/1P’s
shoulder strap fitting and the
camera head connection plate.
shoulder strap fitting and the
camera head connection plate.
VTR connection
plate
plate
Camera head
connection plate
connection plate
Shoulder strap
fitting
fitting
(continued)