Sony DCR-HC20 User Guide
Customizing Your Camcorder
56
b
Notes
• When you use frame recording continuously, the remaining tape time will not be indicated
correctly.
• The last scene will be longer than other scenes.
INT.REC
You can record pictures on the tape at a selected interval.
You can achieve excellent recordings of flowers blooming, etc. with this function.
Connect your camcorder to the wall outlet using the supplied AC Adaptor during
the operation.
You can achieve excellent recordings of flowers blooming, etc. with this function.
Connect your camcorder to the wall outlet using the supplied AC Adaptor during
the operation.
1
Select [SET], then touch [EXEC].
2
Select [INTERVAL], then touch [EXEC].
3
Select a desired interval time (30 seconds, 1, 5, 10 minutes), then touch
[EXEC].
[EXEC].
4
Select [REC TIME], then touch [EXEC].
5
Select a desired recording time (0.5, 1, 1.5, 2 seconds), then touch
[EXEC].
[EXEC].
6
Touch [
RET.].
7
Select [ON], then touch [EXEC].
8
Touch .
flashes.
9
Press REC START/STOP.
Interval recording starts.
Interval recording starts.
lights up on the screen during Interval recording.
To cancel Interval recording, set to [OFF], then touch [EXEC] in the menu
settings.
settings.
b
Note
• There may be a discrepancy in recording time of up to ± 6 frames from the selected time.
ON (
)
Select to record pictures using frame recording.
1
Select [ON], then touch [EXEC].
2
Touch .
3
Press REC START/STOP.
A picture (approximately 6 frames) is recorded, and your
camcorder enters the standby mode.
A picture (approximately 6 frames) is recorded, and your
camcorder enters the standby mode.
4
Move the subject and repeat step 3.
[b]
[b]
[a]
[a]
b. [INTERVAL]
a. [REC TIME]