Sony DCR-IP210 User Manual
146
Preventing accidental erasure
– Image protection
– Image protection
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert a “Memory Stick” into your camcorder.
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VCR.
(2) In VCR mode, press
(2) In VCR mode, press
PB.
In MEMORY mode, go to step 3.
(3) Press INDEX to display the index.
(4) Press - MARK. The screen to protect the image appears.
(5) Press the image you want to protect. The “-” appears above the protected
(4) Press - MARK. The screen to protect the image appears.
(5) Press the image you want to protect. The “-” appears above the protected
image.
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image protection in step 5 again. The “-”
disappears.
disappears.
Note
Formatting erases all information on the “Memory Stick,” including the protected
image data. Check the contents of the “Memory Stick” before formatting.
Formatting erases all information on the “Memory Stick,” including the protected
image data. Check the contents of the “Memory Stick” before formatting.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot carry out image protection.
You cannot carry out image protection.
3
INDEX
4,5
1
2
3
4
5
6
EXIT
RET
-
MARK
1 / 40
1
2
3
4
5
6
EXIT
DEL
MARK
-
MARK
T
t
-
2 / 40
T
t
-
MARK