Sony DCR-PC1000 Manual
57
Using the Menu
DCR-PC1000 2-591-678-11(1)
Continued
DATE/TIME
Displays the date and time.
CAMERA DATA (below)
Displays camera setting data.
This cannot be selected during Easy
Handycam operation.
This cannot be selected during Easy
Handycam operation.
0:00:00:00
60min
AWB
100
9dB
F1. 8
AUTO
1
2
2
3
4
4
5
6
SteadyShot off
*
Exposure
*
White balance
*
Gain
*
Shutter speed
Aperture value
* Appears only during tape playback.
• Camera setting data does not appear when
movies on a “Memory Stick Duo” are played
back.
back.
• The exposure adjustment value (0EV), a shutter
speed, and the aperture value appear when still
images on a “Memory Stick Duo” are played
back.
images on a “Memory Stick Duo” are played
back.
• appears for a picture recorded using a flash.
• In the DATE/TIME data display, the date and
• In the DATE/TIME data display, the date and
time are displayed in the same area. If you
record a picture without setting the clock, [--- --
----] and [--:--:--] will appear.
record a picture without setting the clock, [--- --
----] and [--:--:--] will appear.
REMAINING
AUTO
Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.
• When you set the POWER switch to PLAY/
about 8 seconds in situations such as those
described below.
• When you set the POWER switch to PLAY/
EDIT or CAMERA-TAPE with a cassette
inserted.
inserted.
• When you touch
(Play/Pause).
ON
Always displays the remaining tape
indicator.
indicator.
REMOTE CTRL (Remote control)
The default setting is [ON], allowing you to
use the Remote Commander (p. 32).
use the Remote Commander (p. 32).
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
remote control unit.
• The setting returns to [ON] when you have
the power source disconnected from your
camcorder for more than 5 minutes.
camcorder for more than 5 minutes.
REC LAMP (Recording lamp)
The camera recording lamp will not light
up during recording when you set this to
[OFF]. (The default setting is [ON].)
up during recording when you set this to
[OFF]. (The default setting is [ON].)
BEEP
ON
A melody sounds when you start/stop
recording, or operate the touch panel.
recording, or operate the touch panel.
OFF
Cancels the melody.
DISP OUTPUT
LCD PANEL
Shows displays such as the time code on
the LCD screen and in the viewfinder.
the LCD screen and in the viewfinder.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen, LCD screen, and in the
viewfinder.
the TV screen, LCD screen, and in the
viewfinder.