Sony DCR-TRV40 User Guide
167
“
Memory Stick
”
Operations
You can protect selected images to prevent accidental erasure of important images.
Before operation
Insert a “Memory Stick” into your camcorder.
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only) or VCR.
Make sure that the LOCK switch is set to the left (unlock) position.
(2) Press INDEX on your camcorder to display the index.
(3) Press - MARK. The screen to protect the image appears.
(4) Press the image you want to protect. The “-” appears on the protected
(3) Press - MARK. The screen to protect the image appears.
(4) Press the image you want to protect. The “-” appears on the protected
image.
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image protection in step 4 again. The “-”
disappears.
disappears.
Note
Formatting erases all information on the “Memory Stick,” including the protected
image data. Before formatting a “Memory Stick”, check its contents.
Formatting erases all information on the “Memory Stick,” including the protected
image data. Before formatting a “Memory Stick”, check its contents.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot protect images.
You cannot protect images.
Preventing accidental erasure
– Image protection
– Image protection
2
INDEX
3,4
1
2
3
4
5
6
EXIT
RET.
-
MARK
1 / 40
1
2
3
4
5
6
EXIT
DEL
MARK
-
MARK
T
t
-
2 / 40
T
t
-
MARK