Sony dvp-f41m User Guide

Page of 108
96
The player does not operate properly.
, When static electricity, etc., causes the player 
to operate abnormally, disconnect the AC 
power cord once, then connect it again.
Nothing is displayed on the front 
panel display.
, “DIMMER” in “CUSTOM SETUP” is set to 
“OFF.” Set “DIMMER” to “BRIGHT” or 
“DARK” (page 89). If you set to “AUTO,” the 
display turns on only when you operate the 
player.
5 numbers or letters are displayed on 
the screen and on the front panel 
display.
, The self-diagnosis function was activated. 
(See the table on page 96.)
The disc cannot be removed and 
“LOCKED” appears on the front panel 
display.
, Contact your Sony dealer or local authorized 
Sony service facility.
Self-diagnosis Function 
(When letters/numbers appear in the 
display)
When the self-diagnosis function is activated 
to prevent the player from malfunctioning, a 
five-character service number (e.g., C 13 00) 
with a combination of a letter and digits 
appears on the screen and the front panel 
display. In this case, check the following 
table.
First three 
characters 
of the 
service 
number
Cause and/or corrective 
action
C 13
The disc is dirty.
, Clean the disc with a soft cloth 
(page 9).
C 31
The disc is not inserted correctly.
, Re-insert the disc correctly.
E XX 
(xx is a 
number)
To prevent a malfunction, the 
player has performed the self-
diagnosis function. 
, Contact your nearest Sony 
dealer or local authorized 
Sony service facility and give 
the 5-character service 
number.
Example: E 61 10
C:13:00