Sony dvp-pq1 Manual

Page of 2
Playable discs
and special
words
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem. Should any problem persist, consult
your nearest Sony dealer.
Power
The player does not turn on.
1
Connect the power cord (mains lead)
securely.
1
Close the lid of the player until it clicks.
Display
There is no picture.
The picture is distorted.
1
Check to see if the player is connected
securely.
1
Check to see if the connecting cord is
damaged.
1
Check the connection and change the video
input on the TV so that the picture output
from this player is displayed on the TV
screen.
1
If the video signal from your DVD player is
output to your TV via a VCR, the copy-
protection signal of some DVD programs
could affect the picture quality. If you still
experience problems after connecting this
player directly to your TV, try connecting to
the S VIDEO input of your TV, if it has one.
1
For Asian models only:
If the player’s menu display or the Setup
Display is distorted, change the color
system of the player to PAL or NTSC.
Hold ?/1 down while pressing x on the
player. The default setting is NTSC.
The picture does not fill the screen even
after adjusting the “TV TYPE” in
“CUSTOM SETUP.”
1
The aspect ratio is fixed on your DVD.
Audio
There is no sound.
1
Check to see if the player is connected
securely.
1
Check to see if the audio connecting cord is
damaged.
1
Check to see if the player is connected
correctly to the amplifier.
1
Change the audio input setting of your
amplifier so that you can hear the sound
from this player.
1
The player is in the pause, Slow Motion
Play, or the scan mode.
1
If no sound is output from the DIGITAL
OUT (COAXIAL) jack, check the audio
setup setting. (See “Settings and
Adjustments” on the Blue Side.)
1
Press AUDIO repeatedly and select
“STEREO” to play DTS sound tracks on a
CD.
A loud noise occurs.
1
When playing a CD with DTS sound tracks,
noise will come from the AUDIO OUT L/R
jacks.
The volume is low.
1
Select “ON” for “AUDIO ATT” in the audio
setup setting. (See “Settings and
Adjustments” on the Blue Side.)
1
For Asian models only:
If you are playing a Super VCD which does
not contain a second audio track, no sound
will come out when you select “2:
STEREO,” “2: 1/L,” or “2: 2/R” by pressing
AUDIO repeatedly.
Operation
The remote does not function.
1
Remove any obstacles between the remote
and the player.
1
Use the remote near the player.
1
Point the remote at the remote sensor on
the player.
1
Replace all batteries in the remote with new
ones.
The disc does not play.
1
Close the lid of the player until it clicks.
1
Place the disc on the tray with the recorded
side facing down, and press its center until
it clicks into place.
1
The disc type is not compatible with the
player.
1
Moisture has condensed inside the player.
(See “Precautions” for details.)
The player does not start playing from
the beginning of a disc.
1
The player is in Repeat Play, Shuffle Play, or
Resume Play mode. To return to normal
play mode, press CLEAR or press x twice.
Playback stops automatically.
1
A disc with an auto pause signal stops
playback at that signal.
I cannot perform some functions such as
Stop, Scan, Slow Motion Play, Repeat Play,
or Shuffle Play.
1
Some discs prohibit the operation of these
functions.
For better pictures
If your TV* has an S VIDEO input jack, connect this player to your TV
using an S VIDEO cord for higher quality images.
* You can also use monitors and projectors.
Connecting to your TV using an S VIDEO cord
For better sound
You can connect this player to an amplifier and speakers to enjoy better
sound. See the relative diagrams below to connect to an amplifier.
– A stereo amplifier: Use a stereo audio cord.
– An AV amplifier with DTS, Dolby Digital, or MPEG audio decoder: Use
a coaxial digital cord*. You can enjoy the DVD’s DTS, Dolby Digital, or
MPEG audio sound.
– An AV amplifier with Dolby Surround (Pro Logic) decoder: Use a stereo
audio cord or coaxial digital cord*. You can enjoy the DVD’s Dolby
Surround sound.
* If you connect a coaxial digital cord, you cannot use the TVS function of this
player.
Before operating this player, adjust the settings of this player (“DIGITAL
OUT”/“DOLBY DIGITAL”/“DTS”/“MPEG”) according to the connected
components (e.g., amplifier). For details, see “Settings and Adjustments”
on the Blue Side of this manual.
Connecting an amplifier using a stereo audio cord
Connecting an amplifier using a coaxial digital cord
Using the
Design Sheet
You can open the clear, fan-shaped cover on the
lid of this player and insert the supplied
“design sheet” or your favorite pictures and
photos.
1
Press ZPUSH to open the lid of the player.
2
On the back side of the lid, slide the lock
(
1
) and release the hook (
2
).
3
Close the lid, and remove the cover.
4
Place a design sheet on the lid.
5
Align the two holes of the cover with the
tabs on the lid (
1
). Insert the hook into
the hole in the lid (
2
) until it clicks.
Notes
• Do not insert anything larger than the design sheet
or thicker than a photo beneath the cover.
• Depending on the type of paper you are using or
the printing conditions, the cover may get smeared
with ink.
Specifications
System
Laser: Semiconductor laser
Signal format system:
U.S./Canadian models: NTSC
European models: PAL/NTSC
Asian models: NTSC/PAL (See the
“Display” section in “Troubleshooting”
to switch systems.)
Outputs
(Jack name: Jack type/Output level/
Load impedance)
AUDIO OUT L/R: Phonojack/2Vrms/10k
Ω
DIGITAL OUT (COAXIAL): Phonojack/0.5Vp–p/75
Ω
VIDEO OUT: Phonojack/1.0Vp–p/75
Ω
S-VIDEO OUT: 4-pin mini DIN/
Y: 1.0Vp–p,
C: 0.3Vp–p (PAL), 0.286Vp–p (NTSC)/
75
Ω
General
Power requirements:
U.S./Canadian models: 120V, 60Hz
European/Asian models: 220-240V,
50/60Hz
Power consumption: 9W
Dimensions (approx.): 190
×135×235mm (7×5×9in.)
(w/h/d)
Mass (approx.): 1.3kg (2.9lbs)
Operating temperature: 5
°C to 35°C (41F to 95F)
Operating humidity: 25-80%
Supplied accessories
Operating Instructions (1)
Audio/video cord (1)
Remote (1)
AA (R6) size batteries (2)
EURO AV adaptor (For European models only) (1)
Design sheet
Specifications and design are subject to change
without notice.
E
NERGY 
S
TAR
®
 is a U.S. registered mark. As an
E
NERGY 
S
TAR
®
 Partner, Sony Corporation has
determined that this product meets the E
NERGY 
S
TAR
®
guidelines for energy efficiency.
Language Code List
The language spelling conforms to the ISO 639:1988 (E/F) standard.
Code
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1028
Abkhazian
1032
Afrikaans
1039
Amharic
1044
Arabic
1045
Assamese
1051
Aymara
1052
Azerbaijani
1053
Bashkir
1057
Byelorussian
1059
Bulgarian
1060
Bihari
1061
Bislama
1066
Bengali;
Bangla
1067
Tibetan
1070
Breton
1079
Catalan
1093
Corsican
1097
Czech
1103
Welsh
1105
Danish
1109
German
1130
Bhutani
1142
Greek
1144
English
1145
Esperanto
1149
Spanish
1150
Estonian
1151
Basque
1157
Persian
1165
Finnish
1166
Fiji
1171
Faroese
1174
French
1181
Frisian
1183
Irish
1186
Scots Gaelic
1194
Galician
1196
Guarani
1203
Gujarati
1209
Hausa
1217
Hindi
1226
Croatian
1229
Hungarian
1233
Armenian
1235
Interlingua
1239
Interlingue
1245
Inupiak
1248
Indonesian
1253
Icelandic
1254
Italian
1257
Hebrew
1261
Japanese
1269
Yiddish
1283
Javanese
1287
Georgian
1297
Kazakh
1298
Greenlandic
1299
Cambodian
1300
Kannada
1301
Korean
1305
Kashmiri
1307
Kurdish
1311
Kirghiz
1313
Latin
1326
Lingala
1327
Laothian
1332
Lithuanian
1334
Latvian;
Lettish
1345
Malagasy
1347
Maori
1349
Macedonian
1350
Malayalam
1352
Mongolian
1353
Moldavian
1356
Marathi
1357
Malay
1358
Maltese
1363
Burmese
1365
Nauru
1369
Nepali
1376
Dutch
1379
Norwegian
1393
Occitan
1403
(Afan)Oromo
1408
Oriya
1417
Punjabi
1428
Polish
1435
Pashto;
Pushto
1436
Portuguese
1463
Quechua
1481
Rhaeto-
Romance
1482
Kirundi
1483
Romanian
1489
Russian
1491
Kinyarwanda
1495
Sanskrit
1498
Sindhi
1501
Sangho
1502
Serbo-
Croatian
1503
Singhalese
1505
Slovak
1506
Slovenian
1507
Samoan
1508
Shona
1509
Somali
1511
Albanian
1512
Serbian
1513
Siswati
1514
Sesotho
1515
Sundanese
1516
Swedish
1517
Swahili
1521
Tamil
1525
Telugu
1527
Tajik
1528
Thai
1529
Tigrinya
1531
Turkmen
1532
Tagalog
1534
Setswana
1535
Tonga
1538
Turkish
1539
Tsonga
1540
Tatar
1543
Twi
1557
Ukrainian
1564
Urdu
1572
Uzbek
1581
Vietnamese
1587
Volapük
1613
Wolof
1632
Xhosa
1665
Yoruba
1684
Chinese
1697
Zulu
1703
Not specified
Area Code List
Standard
Code number
Argentina
2044
Australia
2047
Austria
2046
Belgium
2057
Brazil
2070
Canada
2079
Chile
2090
China
2092
Denmark
2115
Finland
2165
France
2174
Germany
2109
India
2248
Indonesia
2238
Italy
2254
Japan
2276
Korea
2304
Malaysia
2363
Mexico
2362
Netherlands
2376
New Zealand
2390
Norway
2379
Pakistan
2427
Philippines
2424
Portugal
2436
Russia
2489
Singapore
2501
Spain
2149
Sweden
2499
Switzerland
2086
Thailand
2528
United Kingdom 2184
7
Press ENTER.
8
Select the limitation level (e.g., “4:PG13”)
using V/v, and press ENTER.
The viewer limitation becomes more strict as
the number becomes lower.
To return to the previous screen
Press O.
To turn off the display
Press DISPLAY.
To change the password
After performing step 4 of “Setting the
playback limitation level,” select “CHANGE
PASSWORD 
c” using V/v, and press ENTER.
Enter your 4-digit password using 
B/V/v/b,
and press ENTER. The display for changing
the password appears. Enter a new password
and press ENTER. To confirm the password,
enter the new password again, and press
ENTER.
Playing discs with playback
limitations
1
Place the disc on the tray, and close the lid
until it clicks. Then press H.
The display for entering your password
appears.
2
Enter the 4-digit password using B/V/v/b,
and press ENTER.
Playback starts.
To cancel the playback limitation
Select “OFF” for “LEVEL” in step 8 of “Setting
the playback limitation level.”
If you forget your password
Open the lid and perform steps 1-3 of “Setting
the playback limitation level.” Enter the 6-digit
number “199703” in step 4, and press ENTER.
After entering a new password and pressing
ENTER, repeat the entire procedure from step 1
of “Playing discs with playback limitations.”
Identifying the discs
Playable discs
DVD VIDEOs: 
Music CDs: 
VIDEO CDs: 
The “DVD VIDEO” logo is a trademark.
Non-playable discs
• CD-Rs/CD-RWs/CD-ROMs (including photo
CDs)
(except those discs that are recorded in music CD
or VIDEO CD format, and MP3 audio tracks)
• Data sections in CD-EXTRAs
• HD (high density) layer of Super Audio CDs
• DVD-ROMs, DVD Audio discs, DVD-RWs (VR
mode)
• DVDs with region codes that cannot be played on
this player.
• Irregularly shaped discs such as heart- or star-
shaped discs.
• A disc with stickers or glue on its surface.
For U.S./Canadian models:
• A disc recorded in a color system other than NTSC.
For European/Asian models:
• A disc recorded in the NTSC color system when
connected to a PAL TV.
• A disc recorded in the PAL color system when
connected to an NTSC TV.
Note
Some CD-Rs/CD-RWs/DVD-Rs/DVD-RWs (VR
mode) may not be able to play due to the recording
conditions (i.e., not finalized, etc.).
More on playable DVDs
Region code
Your player has a region code printed on the bottom
of the player (see “Precautions” for the specific
location) and will only play DVDs that are labeled
with identical region codes or the 
ALL
 mark.
Copyright
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents, other intellectual property rights
owned by Macrovision Corporation, and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
More on playable DATA CDs
Formats
You can play MP3 audio tracks recorded on CD-Rs/
CD-RWs/CD-ROMs in accordance with ISO9660*
Level1/Level2/Joliet formats.
You can also play discs with MP3 audio tracks
recorded in multisession format (a format in which
data is added on to the disc) only if an MP3 audio
track is recorded in the first session.
*A logical file format for CD-ROM formalized by the
International Organization for Standardization (ISO).
 Hint
For details on MP3 audio tracks that can be played,
refer to the notes for “Playing MP3 audio tracks from
a list” on the Blue Side of this manual.
Understanding disc structures
A disc is structured by sections as shown below.
DVD
*
Equivalent to one movie, album, or song.
VIDEO CD/CD
*
Sections of a picture or a music feature on a VIDEO CD or CD.
On a VIDEO CD with PBC function, a disc is divided
up into “scenes.”
DATA CD (CD-R/CD-RW/CD-ROM)
*
Folders made to record MP3 audio tracks on a disc.
*
Audio data recorded in MP3 format. (MP3 files)
Understanding special words
Dolby* Digital
Digital audio compression technology developed by
Dolby Laboratories. Conforms to 5.1ch surround
mode.
* Manufactured under license from Dolby Laboratories. “Dolby,”
“Pro Logic,” and the double-D symbol are trademarks of Dolby
Laboratories.
DTS*
Digital audio compression technology developed by
Digital Theater Systems. Conforms to 5.1ch surround
mode.
*“DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
Dolby Surround (Pro Logic)
Audio signal processing technology developed by
Dolby Laboratories for surround mode.
MP3
MP3 (MPEG1 Audio Layer 3) is a standard format
defined by ISO/MPEG which compresses audio
data. This player conforms to a sampling frequency
of 32kHz, 44.1kHz, and 48kHz.
MPEG
The name of a committee that generates international
standards for the digital video and audio
compression system. Also the standard authorized
by the committee. MPEG1 conforms to up to 2-
channel stereo. MPEG2, used on the DVDs, conforms
to up to 7.1ch surround.
The power requirements, power consumption, and
region code of this player are indicated at the bottom
of the player. Check that the player‘s operating
voltage is identical with your local power supply.
On safety
• Caution – The use of optical instruments with this
product will increase eye hazard.
• Should any solid object or liquid fall into the
cabinet, unplug the player and have it checked by
qualified personnel before operating it any further.
On power sources (mains)
• The player is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the player itself has been turned off.
• If you are not going to use the player for a long
time, be sure to disconnect the player from the wall
outlet. To disconnect the AC power cord (mains
lead), grasp the plug itself; never pull the cord.
On placement
• Do not install the player in an inclined position. It
is designed to be operated only in a horizontal
position.
• Place the player in a location with adequate
ventilation to prevent heat build-up in the player.
• Do not place the player on a soft surface such as a
rug that might block the ventilation holes.
• Do not place the player in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
• Keep the player and discs away from equipment
with strong magnets, such as microwave ovens, or
large loudspeakers.
On operation
• If the player is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lenses inside the
player. Should this occur, the player may not
operate properly. In this case, remove the disc and
leave the player turned on for about half an hour
until the moisture evaporates.
• Do not touch the disc if it is still spinning when
you open the lid.
• When you move the player, take out any discs. If
you don‘t, the disc may be damaged.
On adjusting volume
Do not turn up the volume while listening to a
section with very low level inputs or no audio
signals. If you do, the speakers may be damaged
when a peak level section is played.
On cleaning
Clean the cabinet, panel, and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder, or
solvent such as alcohol or benzine.
On cleaning discs
Do not use a commercially available cleaning disc. It
may cause a malfunction.
IMPORTANT NOTICE
Caution: This player is capable of holding a still video
image or on-screen display image on your television
screen indefinitely. If you leave the still video image or
on-screen display image displayed on your TV for an
extended period of time, you risk permanent damage
to your television screen.
Projection televisions are especially susceptible to this.
If you have any questions or problems concerning
your player, please consult your nearest Sony dealer.
Notes about discs
• To keep a disc clean, handle it by its edge. Do not
touch the surface.
• Do not expose the disc to direct sunlight or heat
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as the temperature may
rise considerably inside the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe the disc
from the center out.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
Precautions
Connecting
Other
Components
Troubleshooting
DVP-PQ1
Operating Instructions
© 2002 Sony Corporation  Printed in Malaysia
3-075-713-11(1)
Connecting
the Player
Playing Discs
DVD/VIDEO CD/CD/MP3
Using the
Remote
SHUFFLE/REPEAT/AUDIO/
ANGLE/SUBTITLE/TVS
(surround)
Settings and
Adjustments
Playing MP3 audio tracks
from a list
Limiting Playback
Using the Design Sheet
Connecting Other
Components
Precautions
Troubleshooting
Note
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
For customers in the U.S.A. and Canada
This symbol is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the
appliance.
For customers in Europe
This appliance is classified as a CLASS 1 LASER
product. The CLASS 1 LASER PRODUCT
MARKING is located at the bottom of the player.
Notice for customers in the United Kingdom
and Republic of Ireland
A moulded plug complying with BS1363 is fitted to
this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be
replaced, a 5 AMP fuse approved by ASTA or BSI to
BS1362, (i.e., marked with 
 or 
 mark) must be
used. If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse cover
after you change the fuse. Never use the plug
without the fuse cover. If you should lose the fuse
cover, please contact your nearest Sony service
station.
About this manual
Thank you for purchasing this Sony CD/DVD
Player. Before operating this player, please read this
manual thoroughly and retain it for future reference.
In this manual, the basic information on connection,
operation, and settings is given on the back side
(Blue Side). The advanced information on connection
and settings, and additional information is given on
this side (Brown Side).
WARNING
To prevent fire or shock hazard, do not expose the
player to rain or moisture.
To avoid electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
Power cord (mains lead) must only be changed at a
qualified service shop.
CAUTIONS
• The use of optical instruments with this product
will increase eye hazard. As the laser beam used in
this CD/DVD player is harmful to eyes, do not
attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
• TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT AND FULLY
INSERT.
PRECAUTIONS
• The nameplate is located at the bottom of the
player.
• To prevent fire or shock hazard, do not place
objects filled with liquids, such as vases, on the
apparatus.
For customers in the U.S.A.
Owner’s Record
The model and serial numbers are located at the
bottom of the player. Record the serial number in the
space provided below. Refer to them whenever you
call upon your Sony dealer regarding this product.
Model No.  DVP-PQ1
Serial No.  ___________________
You are cautioned that any change or modifications
not expressly approved in this manual could void
your authority to operate this equipment.
The following caution label is located on the reverse
side of the disc tray.
E n t e r   a   p a s s w o r d ,   t h e n   p r e s s                   .
ENTER
PARENTAL CONTROL
I cannot switch the audio language or the
angle.
I cannot change the subtitle language or
cancel the subtitles.
1
Instead of pressing AUDIO, ANGLE, or
SUBTITLE, press MENU to display the
DVD’s menu and select the desired option
with 
B/V/v/b and ENTER.
1
There are no multilingual tracks, subtitles,
or multi-angles recorded on that DVD.
1
There are no other recorded angles for the
scene you are watching.
1
The changing of language, angle, or
subtitles is prohibited on that DVD.
The player does not operate properly.
1
Static electricity, etc., may affect the player's
operation.
Disconnect the AC power cord (mains
lead), then connect it again.
Error Messages
A five-character service number
(combination of a letter and digits (e.g.,
“E:61:10”)) is displayed on the screen.
1
When the first 3 digits are “C13”:
Clean the disc with a cleaning cloth.
1
When the first 3 digits are “C31”:
Place the disc correctly on the tray.
1
When the digits start with “E”:
Consult your nearest Sony dealer.
 Disc
Title*
1
Chapter
Disc
Album*
3
Track*
4
To S-VIDEO OUT
S VIDEO cord
(not supplied)
To S VIDEO input
TV
Player
To AUDIO OUT L/R
White
Red
White
Red
Audio/video cord
(supplied)
To AUDIO OUT L/R
Audio/video cord
(supplied)
To video input
TV
Player
To audio
input
Yellow
Red
Yellow
Red
Stereo audio cord
(not supplied)
White
Amplifier
White
To VIDEO OUT
Audio/video cord
(supplied)
To video input
TV
Player
To coaxial digital
input
Yellow
Yellow
Coaxial digital cord
(not supplied)
Amplifier
You can set a password and choose a playback
limitation level for DVDs with the playback
limitation function. Scenes that are limited by
this function may be blocked or replaced with
different scenes.
Setting the playback limitation
level
1
Press DISPLAY repeatedly in stop mode to
show Setup Display.
2
Select “CUSTOM SETUP” using V/v, and
press ENTER.
3
Select “PARENTAL CONTROL c” using V/v,
and press ENTER.
4
 Enter a 4-digit password, and press ENTER.
Select the numbers using 
V/v. Press b to go to
the next digit. When entering a password for
the first time, repeat this step once more to
confirm the entered password.
<TV screen>
5
Select “STANDARD” using V/v, and press
ENTER.
6
Select an area as the playback limitation
level standard (e.g., “USA”) using V/v,
and press ENTER.
When you chose “OTHERS 
c,” select and
enter a code number from the area code list
given at the end of this section using 
B/V/v/
b.
Blue Side  
c
 
c
 
c
Brown Side  
c
 
c
 
c
 Disc
Track*
2
Index
Limiting
Playback
To audio
input
To VIDEO OUT
To DIGITAL OUT
(COAXIAL)
Region code
Enter the number starting from here.
Power requirements and
power consumption
design sheet
CD/DVD Player
AUDIO OUT
DIGITAL OUT(COAXIAL)
S-VIDEO OUT
VIDEO OUT
(R)
(L)
I N P U T
S   V I D E O
L ( w h i t e )
R ( r e d )
A U D I O
AUDIO OUT
DIGITAL OUT(COAXIAL)
S-VIDEO OUT
VIDEO OUT
(R)
(L)
I N P U T
V I D E O
I N P U T
L ( w h i t e )
R ( r e d )
A U D I O
S-VIDEO OUT
VIDEO OUT
I N P U T
V I D E O
AUDIO OUT
DIGITAL OUT(COAXIAL)
DIGITAL IN
COAXIAL
DVP-XXXX 
00V 00Hz
00W
NO. 
0-000-000-00
X
1
2
1
1
2
Playable discs and special
words