Sony rdr-gx257 User Guide
18
You can change channels of the recorder using the
number buttons.
number buttons.
Example: for channel 50
Press “5,” “0,” then press ENTER.
Press “5,” “0,” then press ENTER.
Step 6: Initial Setup
Make the basic adjustments by following the on-
screen instructions in “Initial Setup.”
Be careful not to disconnect the cables or exit the
“Initial Setup” function during this procedure.
screen instructions in “Initial Setup.”
Be careful not to disconnect the cables or exit the
“Initial Setup” function during this procedure.
1
Turn on the recorder and your TV. Then
switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
The [LANGUAGE] display appears.
2
Select a language for the on-screen
displays using M/m, and press ENTER.
displays using M/m, and press ENTER.
The [Clock Setting] display appears.
3
Set the date, year, and time using </M/
m/,, and press ENTER to start the clock.
m/,, and press ENTER to start the clock.
You can also use the number buttons.
4
When the Initial Setup is completed, select
[Exit] and press ENTER.
[Exit] and press ENTER.
If you use the cable box/satellite receiver
control, make the necessary settings and
check that the control works correctly
(page 19).
control, make the necessary settings and
check that the control works correctly
(page 19).
Changing channels of the recorder
using the remote
using the remote
1
2
3
4
5
6
7
8
9
0
[/1
</M/m/,,
ENTER
ENTER
O RETURN
TV [/1