Sony rdr-gx330 Manual
23
H
ook
up
s and
s and
Se
tti
tti
n
gs
Step 6: Easy Setup
Make the basic adjustments by following the
on-screen instructions in “Easy Setup.”
on-screen instructions in “Easy Setup.”
1
Turn on the recorder and your TV.
Then switch the input selector on your
TV so that the signal from the recorder
appears on your TV screen.
Then switch the input selector on your
TV so that the signal from the recorder
appears on your TV screen.
The initial settings message appears.
• If this message does not appear, select
• If this message does not appear, select
“Easy Setup” from “SETUP” in the
System Menu (“Settings and
Adjustments” on page 71).
System Menu (“Settings and
Adjustments” on page 71).
2
Press ENTER.
Follow the on-screen instructions to
make the following settings.
make the following settings.
Easy Setup - OSD
Select a language for the on-screen
displays.
displays.
Easy Setup - Clock
Select “Manual” and set the clock using
</M/m/,, then press ENTER. The
day of the week is set automatically.
If you used antenna hookup C (page 15),
you can select “Auto.” The recorder will
automatically search for a channel that
carries a time signal when you turn off
the recorder after finishing Easy Setup.
</M/m/,, then press ENTER. The
day of the week is set automatically.
If you used antenna hookup C (page 15),
you can select “Auto.” The recorder will
automatically search for a channel that
carries a time signal when you turn off
the recorder after finishing Easy Setup.
Easy Setup - Tuner Preset
Select whether or not you have a cable
connection.
The Tuner Preset function automatically
searches for all of the receivable channels
and presets them.
To set the channels manually, see
page 71.
connection.
The Tuner Preset function automatically
searches for all of the receivable channels
and presets them.
To set the channels manually, see
page 71.
Easy Setup - TV Type (page 74)
If you have a wide-screen TV, select
“16:9.” If you have a standard TV, select
either “4:3 Letter Box” (shrink to fit) or
“4:3 Pan Scan” (stretch to fit). This will
determine how “wide-screen” images are
displayed on your TV.
“16:9.” If you have a standard TV, select
either “4:3 Letter Box” (shrink to fit) or
“4:3 Pan Scan” (stretch to fit). This will
determine how “wide-screen” images are
displayed on your TV.
Easy Setup - Audio Connection
If you connected an AV amplifier
(receiver) using a coaxial cord, select
“Yes : DIGITAL OUT” and set the
digital output signal (page 76).
(receiver) using a coaxial cord, select
“Yes : DIGITAL OUT” and set the
digital output signal (page 76).
3
Press ENTER when “Finish” appears.
“Easy Setup” is finished.
To return to the previous step
Press O RETURN.
z
Hint
If you want to run “Easy Setup” again, select “Easy
Setup” from “SETUP” in the System Menu
(page 82).
Setup” from “SETUP” in the System Menu
(page 82).
b
Notes
• If you use an S-video cord to connect your cable
box or satellite receiver, set “Line1 Input” of the
“Line Input” to “S Video” in the “Video” setup
(page 75).
“Line Input” to “S Video” in the “Video” setup
(page 75).
• If there are only a few channels in your area that
carry time signals, setting the clock automatically
may take up to about 20 minutes after the recorder
turns off. If nothing happens even after you wait
about 20 minutes, set the clock manually in
“Clock” of “Basic” (page 72).
may take up to about 20 minutes after the recorder
turns off. If nothing happens even after you wait
about 20 minutes, set the clock manually in
“Clock” of “Basic” (page 72).
[/1
</M/m/,,
ENTER
ENTER
O RETURN
TV [/1