LaCie 301114u User Guide

Page of 54
LaCie d2 SAFE Hard Drive
User Manual
page 
Formatting Your d2 SAFE
7. Formatting Your LaCie d2 SAFE Hard Drive
TeChNICAl  NOTe:
 
FAT 32
 (MS-DOS) is 
recommended for sharing a hard drive with Win-
dows and Mac OS users. However keep in mind 
that the FAT 32  format will slow down your hard 
drive and single file size is limited to 4 GB.
When your SAFE Hard Drive is initialized (see step 
5  on  page  26)  it  is  formatted  for  your  operating  sys-
tem. Your SAFE Hard Drive is is formatted in HFS+ 
if connected to a Mac, or in NTFS if connected to a 
Windows computer. If you would like to use your SAFE 
Hard Drive with both types of operating systems, you 
will have to reformat your drive to FAT 32.
What is Formatting?
When a disk is formatted, the following things oc-
cur: the operating system erases all of the bookkeeping 
information on the disk, tests the disk to make sure that 
all  of  the  sectors  are  reliable,  marks  bad  sectors  (i.e., 
those  that  are  scratched)  and  creates  internal  address 
tables that it later uses to locate information. The LaCie 
Setup Assistant formatted your drive for you automati-
cally the first time you used it. To reformat your drive, 
follow the instructions in this section.
About Partitioning the d2 SAFE Hard Drive
 For technical reasons, the d2 SAFE Hard Driveap-
pears as a removable media reader on Windows com-
puters. Windows does not support partitioning of re-
movable media. 
Mac users can divide the hard drive into sections, 
called  partitions.  A  partition  is  a  section  of  the  hard 
drive’s  storage  capacity  that  is  created  to  contain  files 
and data. For instance, you could create three partitions 
on your drive: one partition for your office documents, 
one as a backup and one for your multimedia files.
Use NTFS if... 
 
...you will be using the drive only with Windows 
2000 or Windows XP (performance will generally 
be greater when compared to FAT 32).  This file 
system is compatible in read only mode with Mac 
OS 10.3 and higher.
Use HFS+ if... 
 
...you will be using the drive on Macs only; perfor-
mance will generally be greater when compared to 
FAT 32.  This file system is NOT compatible with 
Windows OS.
Use FAT 32 (MS-DOS) if... 
 
 
...you will be using your drive with both Windows 
and Mac OS 9.x or 10.x or sharing the drive be-
tween Windows  2000, XP, and 98 SE.  Maximum 
single file size is 4GB.
ImpOrTANT INfO:
  Reformatting will erase 
everything from the hard drive. If you have infor-
mation that you want to protect or continue to use, 
back up this information before reformatting.
File System Formats
There are three different file system format catego-
ries: NTFS, FAT 32 (MS-DOS), and Mac OS Extend-
ed (HFS+). See the table below for more information.