LaCie 301871U User Manual
LaCie Network Space
• DESIGN BY NEIL POULTON
Setup
User Manual
page 10
2.2. Connect the Ethernet Cable
Unlike regular desktop hard drives, the LaCie Network Space is
only accessible when attached to your network with the Ethernet
cable and does not connect directly to your computer with a
USB cable.
only accessible when attached to your network with the Ethernet
cable and does not connect directly to your computer with a
USB cable.
To connect the Ethernet cable:
2. Connect the Ethernet cable to the Ethernet port on the back
of the LaCie Network Space.
3. Connect the other end of the Ethernet cable into an available
Ethernet “out” port on your router or hub (refer to your router
or hub’s documentation if necessary). Allow a few moments
for your network to recognize the drive.
or hub’s documentation if necessary). Allow a few moments
for your network to recognize the drive.
Now move on to step 3, section
IMPORTANT INFO:
Do not connect the LaCie Network
Space directly to your computer via the USB port. The USB port
is intended only for connection of other USB storage devices.
is intended only for connection of other USB storage devices.
Figure 2.2
Gigabit Ethernet Cables And Connectors
The Ethernet cable used to connect your LaCie Network
Space to your network device looks like this:
Space to your network device looks like this:
The ends of the Ethernet cable are the same and either
end can be connected to the LaCie Network Space or your
end can be connected to the LaCie Network Space or your
router.
Router or hub
IN
OUT