Draytek 2950 User Guide

 

Vigor2950 Series User’s Guide 

74 

For adding a new rule, click Add to open the following page.   

 

ACT 

Check this box to invoke these settings. 

Local Address Click 

the 

Edit button to set the local IP address (on LAN) for 

the rule.   

Remote Address Click 

the 

Edit button to set the remote IP address (on 

Lan/WAN) for the rule. 

Edit   

It allows you to edit source address information.   

Address Type – Determine the address type for the source 
address.  
For Single Address, you have to fill in Start IP address.   
For Range Address, you have to fill in Start IP address and 
End IP address.   
For Subnet Address, you have to fill in Start IP address and 
Subnet Mask. 

DiffServ CodePoint   

All the packets of data will be divided with different levels 
and will be processed according to the level type by the 
system. Please assign one of the level of the data for 
processing with QoS control. 

Service Type 

It determines the service type of the data for processing with 
QoS control. It can also be edited. You can choose the 
predefined service type from the Service Type drop down list. 
Those types are predefined in factory. Simply choose the one 
that you want for using by current QoS. 

By the way, you can set up to 20 rules for one Class. If you want to edit an existed rule, 
please select the radio button of that one and click Edit to open the rule edit page for 
modification.