Draytek 2950 Quick Setup Guide

 

 

16

Accept WEP or WPA clients with 802.1x authentication. 
Remember to select WPA type to define either Mixed or 
WPA2 only in the field below. Since the key will be 
auto-negotiated during authentication, the field of key 
setting below will be not available for input. 

Accepts WPA clients and the encryption key should be 
entered in PSK. Remember to select WPA type to define 
either Mixed or WPA2 only in the field below. 

Accept WPA clients with 802.1x authentication. Remember 
to select WPA type to define either Mixed or WPA2 only in 
the field below. Since the key will be auto-negotiated 
during authentication, the field of key setting below will be 
not available for input. 

 

3. 

For WPA encryption, type in 8~63 ASCII characters or 64 Hexadecimal digits 

leading by 0x, for example "0123456789ABCD...." or "0x321253abcde....." on the 
field of Pre-Shared Key (PSK). WPA encrypts each frame transmitted from the 
radio using the Pre-Shared Key (PSK) which entered from this panel.   

4. 

As to WEP encryption, select 64-bit or 128-bit as the encryption mode. For 64bits 

WEP key, type in 5 ASCII characters or 10 hexadecimal digitals leading by 0x, for 
example, ABCDE or 0x4142434445. And for 128bits WEP key, type in 13 ASCII 
characters or 26 hexadecimal digits leading by 0x, for example, ABCDEFGHIJKLM 
or 0x4142434445464748494A4B4C4D. Only one WEP key can be selected and 
allows user to type in the characters. 

5. 

Click OK to save settings. 

Be aware that for the communication, all wireless devices must support the same 
encryption bit length and share the same key. If WEP mode is selected, only one of four 
preset keys can be selected at one time.