LevelOne FBR-4000 User Guide
Page 46
Protocol & Port
Binding
Binding
Protocol and Port Binding
Use these settings if you wish to ensure that particular traffic is sent by a
specific WAN port, and thereby a particular ISP account.
specific WAN port, and thereby a particular ISP account.
Enable - Enable or disable each item as required.
Source IP - IP address of source from which packets are sent.
Destination IP
– IP address of destination to which packets are sent.
Subnet Mask
– With a subnet mask other than 255.255.255.255, you can
make an IP sub-network as your destination.
Protocol
– Select protocol type used by the traffic you wish to configure.
Port Range - Enter the beginning and end of the port range used by the
traffic you wish to configure. If only a single port is used, enter the port
number in both fields.
number in both fields.
WAN - Select the WAN port you wish this traffic to use.
Protocol & Port
Binding List
This list shows the details of all protocol and port configuration data which are
currently defined. You can modify them by clicking on a selected row.
currently defined. You can modify them by clicking on a selected row.