Roland Dm-10 Owner's Manual

 

921

 

•

To prevent malfunction and/or damage to speakers or other 
devices, always turn down the volume, and turn off the power 
on all devices before making any connections.

 

926a

 

•

When connection cables with resistors are used, the volume level 
of equipment connected to the inputs (Input Jucks) may be low. 
If this happens, use connection cables that do not contain 
resistors, such as those from the Roland PCS series.

 

941

 

•

Once the connections have been completed, turn on power to 
your various devices in the order specified. By turning on 
devices in the wrong order, you risk causing malfunction and/or 
damage to speakers and other devices. (When turning the power 
off, reverse this procedure.)
< Connected devices 

 

→

 

 DM-10 >

 

942

 

• This unit is equipped with a protection circuit. A brief 

interval (a few seconds) after power up is required before 
the unit will operate normally.

INPUT
(FROM RIGHT)

OUTPUT
(TO LEFT)

Sound Module, CD Player, MD Player, etc.

Select

* When you connect a cable to the 
  DIGITAL IN on the front panel, the 
  sound of any devices connected to 
  the DIGITAL INs on the rear panel 
  will not be heard.

Priority (*)

Front Panel

Rear Panel

DM-10_efgis 7 ページ ２００４年１月８日　木曜日　午後１時５９分