Roland RD-700 Owner's Manual

 

Tones Are Al-

tered

 

Did you call up a Setup? 
• When a Setup is called up, the cur-

rent Tone, effect, and other settings 
are disabled, and the selected Set-
up goes into effect (p. 54). Resave 
required settings to a Setup (p. 56).

Did you press ONE TOUCH [PI-
ANO]? 
• When ONE TOUCH [PIANO] is 

pressed, the current Tone, effect, 
and other settings are disabled, 
and settings for use in piano per-
formances go into effect (p. 35). Re-
save required settings to a Setup 
(p. 56).

Is the Tone Control function assigned 
to the [CONTROL] knob? 
• Check the Control/EQ Control set-

 

When UPPER 

Tone is Select-

ed, LOWER 

Changes to 

Same Tone

 

Are the UPPER Part and the LOWER 
Part set to the same value in the Local 
Part Param Part Assign settings in 
Edit mode (p. 89)?

 

Tone Doesn’t 

Change/Key-

board Not 

Switching to 

Split or Layer

 

Is [MIDI TX] set to ON? 
• When [MIDI TX] is set to ON, the 

external sound generator is con-
trolled. To change the RD-700’s 
Tones and make settings in Key-
board mode, set [MIDI TX] to OFF 
(p. 59).

Is the PART SELECT button for the 
Part containing the Tone you want to 
change set to ON (p. 44)?

Is [NUM LOCK] on? 
• Tone categories cannot be selected 

with the TONE SELECT buttons 
when [NUM LOCK] is on.

 

Tone Doesn’t 

Change When a 

TONE SELECT 

Button is 

Pressed

 

Could you have the Tone Wheel 
screen appearing in the display? 
(p. 75)
• In the Tone Wheel screen, pressing 

a TONE SELECT button selects 
one of the Tone Wheels from 1 
through 10.

 

Rhythm Not 

Sounding

 

Set the Part 10 Receive Channel set-
ting in Internal Part Prm in Edit 
mode to 10 (p. 90).

 

Rhythm Not 

Sounding

 

Has the System Clock Source setting 
in Edit mode been set to MIDI (p. 70)? 
Do you have an external MIDI device 
connected?
• You cannot set the tempo with the 

RD-700 when Clock Source is set to 
MIDI. Accordingly, if no external 
MIDI device is connected, then no 
tempo setting is made for the 
Rhythm, and so the Rhythm does 
not sound.

Is the MIDI TX screen (p. 59) active?
 • Rhythms do not play when the 

MIDI TX screen appears in the dis-
play. Press [MIDI TX] so that the 
button’s indicator light goes off.

In Edit mode, is the Rhythm Pattern’s 
Pattern setting turned OFF (p. 82)?

 

Rhythm Intro 

Not Played/

Rhythm Not 

Starting From 

Beginning

 

Is the MIDI TX Part’s PART SWITCH 
[RHYTHM] turned on?
• Are the Local Part’s Rhythm and 

the MIDI TX Part’s Rhythms syn-
chronized (p. 51)?

 

Effects Not Ap-

plied/Effects 

Sound Wrong

 

Is a Tone Wheel 1–10 Tone selected? 
Effects are applied differently to the 
Tone Wheel than they are with other 
effects.
• Effects set in MFX/Reverb/Chorus 

MFX Source (p. 77) are applied re-
gardless of each Part MFX Switch 
ON/OFF setting in the Internal 
Part Prm settings (p. 90), or the 
MFX setting for each Tone in the 
Tone Edit (p. 80).

• When Tone Wheel is selected for 

multiple Parts, it is applied to all 
the Parts, regardless of whether the 
Rx Bender Switch and Rx Hold-1 
Switch in the Internal Part Prm set-
tings are ON or OFF (p. 91).

Is MULTI EFFECTS [ON/OFF] set to 
OFF (p. 53)?

Is the [CONTROL] knob set to MFX 
Control? 
• In Edit mode, set the Control set-

ting in MFX/Reverb/Chorus to 
MFX CONTROL (p. 77).

RD-700_e.book 100 ページ ２００４年４月２６日　月曜日　午前１１時５４分