Roland RD-700GX User Guide
104
Detailed Settings for Each Function ([EDIT] Button)
The process of changing tone parameters to create the tones
you like, and changing the settings for various functions is
known as “editing.” When the [EDIT] button is pressed and the
indicator is lit, the RD-700GX switches to “Edit mode.”
You can save edited settings to Setups.
Edited settings are discarded when the RD-700GX’s power is
turned off, so be sure that any settings you want to keep are
saved to a Setup (p. 67).
However, the System settings (0. System) can be saved in the
edit screen. Therefore, no changes to the settings are lost,
even when the power is turned off.
you like, and changing the settings for various functions is
known as “editing.” When the [EDIT] button is pressed and the
indicator is lit, the RD-700GX switches to “Edit mode.”
You can save edited settings to Setups.
Edited settings are discarded when the RD-700GX’s power is
turned off, so be sure that any settings you want to keep are
saved to a Setup (p. 67).
However, the System settings (0. System) can be saved in the
edit screen. Therefore, no changes to the settings are lost,
even when the power is turned off.
fig.05-01e
The following settings will be stored as common
settings for the entire RD-700GX when you press
the [F1 (WRITE)] button in an edit screen.
settings for the entire RD-700GX when you press
the [F1 (WRITE)] button in an edit screen.
• 0. System
• 4. Sound Control
• 8. V-LINK
However, following settings are not saved.
• V-LINK On or Off
• Sound Control On or Off
• Device ID
You can set the following parameters in Edit mode.
Setting Parameters
Edit Menu Screen
Edit Screen
Select a menu
Switch screens
VALUE
dial
dial
Select an item
Change the value
VALUE dial
(The number of Edit screen
pages may vary according
to the menu selected.)
pages may vary according
to the menu selected.)
Extinguishing the
[EDIT] button’s indicator
[EDIT] button’s indicator
Exit the Edit Mode
Enter the Edit Mode
You can input the value using the
TONE SELECT buttons, and press
the [ENTER] button to set the value.
TONE SELECT buttons, and press
the [ENTER] button to set the value.
Using the TONE SELECT buttons,
you can select the menu.
you can select the menu.
Getting the [EDIT] button’s
indicator light
indicator light
Parameters That Can Be Set
0.System
Master Tune
Master Volume
EQ Mode
Sound Control Mode
Pedal Mode
S1/S2 Mode
Tone Remain
Clock Source
Clock Out
SETUP Control Channel
Device ID
USB Driver
USB Memory Mode
USB MIDI Thru Switch
MIDI OUT3 Port Mode
Damper Polarity
FC1 Polarity
FC2 Polarity
Indicator Off Mode
Part Mode
Temperament
Temperament Key
Rx. GM/GM2 System ON
Rx. GS Reset
Audio Volume
Song Stop Mode
1. Key Touch
Key Touch
Key Touch Offset
Velocity
Velocity Delay Sensitivity
Velocity Keyfollow Sensitivity
Key Touch Mode
RD-700GX_e.book 104 ページ 2008年2月13日 水曜日 午後5時49分