Roland RD-700GX User Guide

 

Detailed Settings for Each Function ([EDIT] Button)

 

You can store different Sound Control settings (p. 50) for each 
individual Setup (p. 65).

This setting determines whether or not the Setup Sound Control 
settings values are to be changed when Setups are switched.

This setting determines whether or not the pedal settings are 
switched to the values stored in the Setup you are switching to.

 

When this is set to SYSTEM, “Pedal Setting” appears in the 
lower right of the screen. Pressing the [F2] button at this point 
calls up the screen for the function assigned to the pedal. 

 

SETUP

Sound Control settings change 
when Setups are switched.

SYSTEM

Sound Control settings do not 
change when Setups are 
switched.

 

SETUP

Pedal settings change when 
Setups are switched.

SYSTEM

Pedal settings do not change 
when Setups are switched.

 

00: OFF

No control

CC01–CC31, 
CC33–CC95

Controller Numbers 1–31, 
33–95

96: 
BEND UP

The pitch will rise in the 
same way as when you 
move the Pitch Bend lever 
toward the right.

97: 
BEND DOWN

The pitch will fall in the same 
way as when you move the 
Pitch Bend lever toward the 
left.

98: 
AFTERTOUCH

Controls aftertouch.

99: 
OCTAVE UP

Each pedal press raises the 
key range in octave steps (up 
to 4 octaves higher).

100: 
OCTAVE 
DOWN

Each pedal press lowers the 
key range in octave steps (up 
to 4 octaves lower).

101:
START/STOP

The external sequencer will 
start/stop.

RD-700GX_e.book 107 ページ ２００８年２月１３日　水曜日　午後５時４９分