Roland RD-700GX User Guide
66
Using the Convenient Functions in Performances
4.
Try playing the keyboard.
The settings are switched to those of the Setup that has been called up.
Setups indicated by a “R.” before the name let you enjoy performing with a session-
like feel while playing a Rhythm (p. 56). Be sure to check it out.
like feel while playing a Rhythm (p. 56). Be sure to check it out.
You can also register the Setups you like and use frequently to the TONE SELECT buttons.
This function allows you to select Setups more quickly.
You can register a total of 40 Setups, ten tones in each of the four banks, to the Favorite
Setups.
This function allows you to select Setups more quickly.
You can register a total of 40 Setups, ten tones in each of the four banks, to the Favorite
Setups.
1.
Press the [SETUP] button to call up the Setup you want to register.
Make sure the [NUM LOCK] button is off at this time.
2.
Press the [F2 (BANK CHANGE)] button to select the bank to which you want to register
the Setup.
the Setup.
3.
Hold down the [F1] button and press the TONE SELECT button for the registration
destination.
destination.
The Setup is registered to the button that is pressed.
Settings registered in the RD-700GX are not deleted even when the power is turned
off.
off.
Registering the Setups You Like (Favorite Setups)
When the Tone screen is displayed, the [SETUP] button’s indicator lights and the Setup
screen appears when the Cursor [
screen appears when the Cursor [
] button is pressed. From the Setup screen, you can
get back to the Tone screen by pressing the Cursor [
] button.
However, the Tone Wheel screen is displayed if “TW-Organ 1–10” is selected for any
ZONE in the Tone screen.
Refer to “Simulating the Creation of Organ Tones (Tone Wheel Mode)” (p. 62).
ZONE in the Tone screen.
Refer to “Simulating the Creation of Organ Tones (Tone Wheel Mode)” (p. 62).
Selecting Setups Other Than the Favorite Setups
1.
Press the [SETUP] button, getting the indicator to light.
2.
Use the [DEC] [INC] buttons, VALUE dial, or TONE SELECT buttons to select
the Setup to be called up.
After the [DEC] [INC] button is pressed or the VALUE dial is rotated, the following
screen appears; the Setup screen then reappears after a few moments.
If you turn the [NUM LOCK] button on and use the TONE SELECT buttons to enter a
Setup number, the screen won’t change. Press the [ENTER] button afterwards to set
the number.
screen appears; the Setup screen then reappears after a few moments.
If you turn the [NUM LOCK] button on and use the TONE SELECT buttons to enter a
Setup number, the screen won’t change. Press the [ENTER] button afterwards to set
the number.
fig.Q2-18g
RD-700GX_e.book 66 ページ ２００８年２月１３日 水曜日 午後５時４９分