Roland RD-700GX User Guide

Page of 216
 
7
 
Important Notes
 
Power Supply
 
301
 
• Do not connect this device to the same electrical outlet as 
an inverter-controlled device such as a refrigerator, 
microwave oven, or air conditioner, or a device that 
contains an electric motor. Depending on how the other 
device is used, power supply noise could cause this device 
to malfunction or produce noise. If it is not practical to use 
a separate electrical outlet, please connect this device via a 
power supply noise filter.
 
307
 
• Before you make connections, you must switch off the 
power on all devices to prevent malfunction and/or 
speaker damage.
 
308
 
• Although the LCD and LEDs are switched off when the 
Power switch is switched off, this does not mean that the 
unit has been completely disconnected from the source of 
power. If you need to turn off the power completely, first 
turn off the Power switch, then unplug the power cord from 
the power outlet. For this reason, the outlet into which you 
choose to connect the power cord’s plug should be one that 
is within easy reach and readily accessible.
 
Location
 
351
 
• If this device is placed near devices that contain large 
transformers, such as power amps, hum may be induced in 
this device. If this occurs, move this device farther away or 
change its orientation.
 
352a
 
• This device may interfere with radio and television reception. 
Do not use this device in the vicinity of such receivers.
 
352b
 
• Noise may be produced if wireless communications 
devices, such as cell phones, are operated in the vicinity of 
this unit. Such noise could occur when receiving or 
initiating a call, or while conversing. Should you 
experience such problems, you should relocate such 
wireless devices so they are at a greater distance from this 
unit, or switch them off.
 
354a
 
• Do not expose the unit to direct sunlight, place it near 
devices that radiate heat, leave it inside an enclosed 
vehicle, or otherwise subject it to temperature extremes. 
Excessive heat can deform or discolor the unit.
 
355b
 
• If you move this device between locations of radically 
different temperature or humidity, water droplets 
(condensation) may form inside the device. Using the 
device in this condition will cause malfunctions, so please 
allow several hours for the condensation to disappear 
before you use the device.
 
358
 
• Do not leave objects on top of the keyboard. This can 
cause malfunctions such as failure to sound.
 
360
 
• Depending on the material and temperature of the surface 
on which you place the unit, its rubber feet may discolor or 
mar the surface.
You can place a piece of felt or cloth under the rubber feet 
to prevent this from happening. If you do so, please make 
sure that the unit will not slip or move accidentally.
 
Care
 
401a
 
• For everyday cleaning wipe the unit with a soft, dry cloth or 
one that has been slightly dampened with water. To remove 
stubborn dirt, use a cloth impregnated with a mild, non-
abrasive detergent. Afterwards, be sure to wipe the unit 
thoroughly with a soft, dry cloth.
 
Addition
 
• If water droplets should adhere to this device, immediately 
wipe them off using a soft dry cloth.
 
402
 
• Do not use solvents such as benzene, thinner, or alcohol, 
since these can cause deformation or color change.
 
Servicing
 
452
 
• If you return this device for servicing, the contents of 
memory may be lost. Please store important contents on a 
USB memory, or make a note of the contents. We take 
utmost care to preserve the contents of memory when 
performing service, but there may be cases when the stored 
content cannot be recovered because the memory section 
has malfunctioned. Please be aware that we cannot accept 
responsibility for the recovery of lost memory content or for 
any consequences of such loss.
 
Other Cautions
 
551
 
• Stored content may be lost due to a malfunction of the 
device or because of inadvertent operation. You should 
back up important content on a USB memory as a 
safeguard against such loss.
 
552
 
• We cannot accept responsibility for the recovery of any 
content lost from internal memory or USB memory, or for 
the consequences of such loss.
 
553
 
• Do not apply excessive force to the buttons, knobs, or 
input/output jacks, since this may cause malfunctions.
 
554
 
• Never strike or apply strong pressure to the display.
 
556
 
• When connecting or disconnecting cables, grasp the plug 
(not the cable) to prevent short circuits or broken 
connections.
 
557
 
• A small amount of heat will radiate from the unit during 
normal operation.
 
558a
 
• Please enjoy your music in ways that do not inconvenience 
other people nearby, and pay particular attention to the 
volume at nighttime. Using headphones will allow you to 
enjoy music without having to be concerned about others.
 
559a
 
• When you need to transport the unit, package it in the box 
(including padding) that it came in, if possible. Otherwise, 
you will need to use equivalent packaging materials.
 
561
 
• Use only the specified expression pedal (EV-5/7; available 
separately). Connecting a pedal made by a different 
manufacturer may cause this device to malfunction.
RD-700GX_e.book 7 ページ 2008年2月13日 水曜日 午後5時49分