Roland v-synth xt Owner's Manual
176
Effects List
23: Analog Phaser
This effect features two analog-type phasers arranged in parallel,
making it stereo compatible. The sound as it cyclically drifts in and
out of phase is added to the source sound, creating the modulation
with the characteristic of phasers.
making it stereo compatible. The sound as it cyclically drifts in and
out of phase is added to the source sound, creating the modulation
with the characteristic of phasers.
fig.MFX-23
24: Digital Phaser
Phaser is an effect that adds a phase-shifted sound to the original
sound to create time-varying change, modulating the sound.
sound to create time-varying change, modulating the sound.
fig.MFX-24
Parameter
Value
Description
Shift Mode
4STAGE,
8STAGE
8STAGE
Sets the number of stages in the
phase shift circuit (four (4STAG)
or eight (8STAGE)).
Setting this to eight stages
(8STAGE) increases the number
of the frequency points that
sound is canceled, giving a
sharper effect.
phase shift circuit (four (4STAG)
or eight (8STAGE)).
Setting this to eight stages
(8STAGE) increases the number
of the frequency points that
sound is canceled, giving a
sharper effect.
Center Freq #1
0–127
Sets the center frequency to
which the phaser effect is ap-
plied.
Increasing this value moves the
effect point of the phaser into
higher frequency ranges.
which the phaser effect is ap-
plied.
Increasing this value moves the
effect point of the phaser into
higher frequency ranges.
Resonance
0–127
Amount of feedback
Increasing this value gives a
more distinctive sound to the ef-
fect.
Increasing this value gives a
more distinctive sound to the ef-
fect.
LFO 1/2 Rate
0.02–5.00 Hz,
note
note
Sets the rate of the swelling
sound.
sound.
LFO 1/2 Depth 0–127
Specifies the depth of modula-
tion.
tion.
LFO 1/2 Phase
NORM, INV
Sets the phase of both left and
right swelling.
NORM: The left and right phase
will be the same.
INV: The left and right phase
will be opposite.
right swelling.
NORM: The left and right phase
will be the same.
INV: The left and right phase
will be opposite.
L
R
Analog
Phaser
Phaser
Freq.
Level
Freq.
Level
4 stage
8 stage
Parameter
Value
Description
Shift Mode
4STAGE,
8STAGE
8STAGE
Sets the number of stages in the
phase shift circuit (four (4STAG)
or eight (8STAGE)).
Setting this to eight stages
(8STAGE) increases the number
of the frequency points that
sound is canceled, giving a
sharper effect.
phase shift circuit (four (4STAG)
or eight (8STAGE)).
Setting this to eight stages
(8STAGE) increases the number
of the frequency points that
sound is canceled, giving a
sharper effect.
Manual
0–127
Specifies the center frequency at
which the sound is modulated.
which the sound is modulated.
Rate #1
0.05–10.0 Hz,
note
note
Specifies the frequency of mod-
ulation.
ulation.
Depth #2
0–127
Specifies the depth of modula-
tion.
tion.
Phase
NORM, INV
Sets the phase of both left and
right swelling.
NORM: The left and right phase
will be the same.
INV: The left and right phase
will be opposite.
right swelling.
NORM: The left and right phase
will be the same.
INV: The left and right phase
will be opposite.
Resonance
0–127
Specifies the amount of feed-
back for the phaser.
Higher settings will give the
sound a stronger character.
back for the phaser.
Higher settings will give the
sound a stronger character.
Mix Level
0–127
Volume of the phase-shifted
sound, relative to the direct
sound
sound, relative to the direct
sound
Ps Low Freq
50–4000 Hz
Frequency of the low range
Ps Low Gain
-15– +15 dB
Gain of the low range
Ps Hi Freq
2000–20000 Hz
Frequency of the high range
Ps Hi Gain
-15– +15 dB
Gain of the high range
L
R
2-Band
EQ
Phaser
Freq.
Level
Freq.
Level
4 stage
8 stage
V-SYNTH_XT_e2 176 ページ 2005年3月23日 水曜日 午後4時39分