Apex ht-150 User Guide

No power

No picture

No sound

Rolling b/w picture

Black & White picture

The playback

picture has 

occasional distortion

Brightness is unsta-

ble or noises are

produced on play-

back pictures    

The unit does not

start playback

MP3 won’t read disc

or  it skips

The remote control

does not work prop-

erly

• Connect the power plug into the wall outlet securely.                   

• Verify the connection from the DVD video output to the TV video input. Then switch TV to 

appropriate mode (video 1).

• Connect the video cable into the jacks securely. Refer to your television owners manual.

• Connect the audio cables into the jacks securely.

• Verify the connection from the DVD audio output to the TV or receiver audio input. Then switch

to the appropriate source on the receiver. Refer to your audio amplifier owners manual.

• From the Setup Menu select “TV Type”.

• Adjust the vertical hold on your TV.

• Damaged S connector (bent pin).

• A small amount of picture distortion may appear because of a poor quality video/sound trans-

fer to disc. This is especially true of some discs manufactured  between 1997-1998..

• Scratched disc.

• Connect the unit directly through the TV and not through any other source. What you’re view-

ing is  the effect of the copy protection circuitry required on all units.

• If you don’t have a video input on your TV, you must purchase an RF adapter from your deal-

er.

• Place the disc with the graphics side up.

• Place the disc on the disc tray correctly inside the guide.

• Make sure the disc is free from scratches & fingerprints.

• Press the SETUP button to turn off the menu screen.

• Cancel the parental lock function or change the parental lock level. 

• Turn the power off then disconnect the power plug and reinsert it back into the wall outlet. Retry

again.

• Reburn disc as the software edition used may not be compatible with the unit. Check web site

for instruction.

• Check web site for instruction on availability of a firmware upgrade.

• Use new editions of software such as Voyetra Audiostation 4, Adaptec’s “Easy CD Creator” or

NTI or Roxio’s Toast Titanium.

• Make sure MP3 file are not encoded with a variable bit rate such as provided by Real

Networks.

• Replace the batteries with new ones.

• Operate the remote control within about 7m.