Apex ht-170 User Guide

1. Connect the supplied FM & AM antennas.
2.To access the radio tuner, press FUNCTION button.(Each press will access in order:
DVD      Analog In      Tuner)
3.To change FM or AM band, press FM/AM button on remote control while in Tuner
Mode.
4.To enter a station frequency directly, use number buttons.
Example: 94.7MHz-press 947 (in FM mode), 1220KHz-press 1220(in AM mode ),  then
press ENTER. 
Please note that not all frequencies have stations assigned to them. 

Read thoroughly before attempting to store any radio stations. The system stores 40 FM
and 20 AM stations.
1.Press FM/AM button to select AM or FM.
2.Press GOTO from the remote control. The tuner will automatically search and store all
local stations with good signal.
3.Press TUNING+ or TUNING- button to scan forward or reverse to a desired radio sta-
tion. To manual scan in increments or decrements, press the TUNING + or TUNING - on
the remote control as long as necessary. After the radio station has been received, the
station will be stored automatically.
4.If you want to cancel the radio station with poor signal, press the CLEAR button, the
station number indicator flashes, then press ENTER button to confirm, the following
radio ration will fill the vacancy.
5.Press PRESET + or PRESET - to select stored frequencies in sequential order.
6.To number your stored stations, press SETUP, input the station number, then press
SETUP again.

NOTE:

• The default setting of the system is DVD playback.