Apex at1302 Instruction Manual

14

Standard - AT1302, AT2002, AT2402, AT2702

1. Power On 

Plug in the supply cord, and press the MAIN POWER SWITCH on the front of
the TV to turn the power on. A channel number will appear on the upper right
corner of screen. Also, the red indicator light on the TV will come on.

2. Standby (Soft Off)

With the main power ON, press the Standby button on the remote control. This
will put the TV in “Standby” or soft off mode. The red indicator light on TV set
will NOT turn off. To turn the TV on again, simply press the Standby button on
the remote control, or press one of the CH +/ - buttons on the TV set.

3. Power Off

With the power ON or in Standby mode, press the MAIN POWER SWITCH on

the front of the TV set to completely turn off the power to the TV set. The red
indicator light on the front of the TV set will turn off.

4. Auto Off 

If the TV is ON (not Standby mode), and there is no signal is coming into the
TV set for 15 minutes, the TV will turn off.

Note:

Avoid switching the TV on and off frequently or rapidly. Doing so may shorten

the life span of internal components.

Tuner Mode
Pressing the DISPLAY button on the remote control while in Tuner mode
will cause the channel number, antenna mode, and clock to appear in
the upper right of the screen. To remove, press DISPLAY again.

Video Mode
Pressing the DISPLAY button on the remote control while in Video Mode
will cause the word “Video” and the clock to be displayed. Press
DISPLAY again to remove.The word “Video” will continue to be displayed
if no video signal is present.

Changing the Channel
While in Tuner mode, press the CH +/ - key to change the channel, or use the
numeric keypad to enter a new channel. For channels over 99, press the 100+
button and then the last two digits of the channel.

Adjusting the Volume
To adjust the volume, press the VOL +/ - key. Also, you may press the FUNCTION
ASSIST key along with the VOL +/ - key to adjust the volume in increments of 4. 

Muting the Volume
To mute the volume, press the MUTE key. To restore the volume, press MUTE
again or press the VOL + key.