Intellitouch sbc-125 Quick Setup Guide

Page of 2
Connecting your phone
Plug one end of the supplied telephone line cord into the line jack. Then plug the other end 
into telephone line jack. Plug in the AC power adapter into a power outlet and the plug the 
other end into 9VDC jack.
Battery installation
The Caller ID phone requires three 1.5V R6P SUM-3 SIZE AA batteries for LCD display.
 
1.  Remove the battery cover from the back of your Caller ID phone.
 
2.  Insert three 1.5V AA size batteries by observing the +/- polarity marked in the battery 
compartment.
 
3.  Replace battery compartment cover.
Using Your Phone
Time Setting
If you have subscribed to Caller ID, the date and time will be automatically set when the first 
call is received. To set the time manually follow the instructions in the Owner’s Manual.
Area Code Setting
When you use this phone for the first time, or move to an area that has a different area code, 
you must enter your area code. This is necessary because the phone must distinguish local or 
long distance calls to properly dial calls from the Caller ID list and phonebook.
1.  Press the 
[MENU] button, using the   or   scroll to SET AREA CODE - press [ENTER] 
button.
2  LCD will Display “SET AREA CODE”.
3.  Using the keypad dial buttons, enter your area code.
4.  When the three-digit area code setting has been completed (for example: if your 
area code is 858 the display will show ‘858’) then press 
[ENTER]
5.  Phone will return to main menu
Placing a Call On Hold
To put a caller on hold, Press the 
[HOLD] button. The red light on the button will light up 
and the LCD will display 
“Holding” indicating that the call is on hold. To continue the 
conversation, just press the 
[HOLD] button again or press the hook switch once.
NOTE: In the HOLD mode, you can hang up the handset. To resume the conversation, just pick up 
the handset.
S B C - 1 2 5   Q U I C K   S TA R T   G U I D E