Edirol LVS-400 Supplementary Manual
7
About the New Functions
With Version 2.0, you can assign PinP (Picture-in-Picture) as well as White Luminance
Key, Black Luminance Key, and Chroma Key (specific color) to either the A-BUS or
B-BUS image.
Key, Black Luminance Key, and Chroma Key (specific color) to either the A-BUS or
B-BUS image.
his effect layers a small image (the “foreground image”) on top of an image displayed
in the full screen (the “background image”).
As an example, here’s how to layer “foreground image B” on top of “background
A.”
in the full screen (the “background image”).
As an example, here’s how to layer “foreground image B” on top of “background
A.”
1
Tilt the video fader towards the A-BUS side.
The image corresponding to the lit (selected) A-BUS button is output from the
OUTPUT connector.
OUTPUT connector.
2
Press [EFFECTS].
The B-BUS button will flash. The image corresponding to the flashing (selected) button
becomes the insert image.
becomes the insert image.
3
Select the PinP pattern you want to use with the MODE knob.
4
Tilt the video fader towards the B-BUS side.
The composite output video contains the image corresponding to the flashing BUS
button and the image corresponding to the lit BUS button.
button and the image corresponding to the lit BUS button.
Composite Functions
Creating Composite Video with PinP Using the
A-BUS Image Within the B-BUS Image
A-BUS Image Within the B-BUS Image
Pressing the A-BUS or B-BUS
buttons to switch images while
creating a composite using two
images with PinP may cause
the image to be disrupted.
buttons to switch images while
creating a composite using two
images with PinP may cause
the image to be disrupted.
TRANSITION TIME
B-BUS
B-BUS
A-BUS
TRANSITION
EFFECTS
LEVEL
MODE
A-BUS
A / B MODE
1
TRANSITION TIME
B-BUS
B-BUS
A-BUS
TRANSITION
EFFECTS
LEVEL
MIX
MODE
WIPE
EFFECTS
A-BUS
A / B MODE
2
3
LVS-400v2_e1.book 7 ページ 2004年8月10日 火曜日 午後5時7分