Sony KLV-32U100M User Guide
7
(GB)
Step 2:
Changing the position
of the arm bases
(Except for the TV
KDL-S23A1s*/
KLV-S23A1s*)
Changing the position
of the arm bases
(Except for the TV
KDL-S23A1s*/
KLV-S23A1s*)
* In the actual model names, the “s” indicates numbers
and/or characters specific to each model.
If you are installing the TV KDL-S23A1s*/KLV-
S23A1s*, do not change the position of the arm
bases.
S23A1s*, do not change the position of the arm
bases.
1
Remove the four angle adjust screws (two on
each side) that secure the stabilizer arms to
the left and right arm bases A.
each side) that secure the stabilizer arms to
the left and right arm bases A.
2
Remove the screws that secure the left and
right arm bases B to the Plate Unit.
right arm bases B to the Plate Unit.
3
Remove the screws that secure the left and
right arm bases A to the Plate Unit.
right arm bases A to the Plate Unit.
4
Move the arm bases A to the inner position,
inserting them into the top left and right
inner slots, and replace the screws from
step 3.
inserting them into the top left and right
inner slots, and replace the screws from
step 3.
5
Move each assembly (stabilizer arm and arm
base B) to the inner position, inserting the
arm bases B into the bottom left and right
Inner slots, and replace the screws from
step 2.
base B) to the inner position, inserting the
arm bases B into the bottom left and right
Inner slots, and replace the screws from
step 2.
6
Secure the stabilizer arms using the angle
adjust screws from step 1.
adjust screws from step 1.
2
5
6
6
5
3
2
5
1
1
4
4
Arm base A
Angle adjust screw
Arm base B
Arm base B
Stabilizer arm
Stabilizer arm
Angle adjust screw
Note
When using an electric screwdriver, set the torque
setting to approximately 2 N·m.
setting to approximately 2 N·m.