Rollei dt3200 User Guide
11
•
FLASH Setting
1.To set the Flash, press the Five-Way Switch to the Left to select the
desired Flash setting. You will have the four types of Flash settings: Flash
Off, Auto Red-eye reduction, Flash Force On, and Night. Once you’ve set
your Flash setting, proceed with your picture taking.
desired Flash setting. You will have the four types of Flash settings: Flash
Off, Auto Red-eye reduction, Flash Force On, and Night. Once you’ve set
your Flash setting, proceed with your picture taking.
•
Self Timer
To set the self timer under the capture mode, please press Five-Way
Switch to the Right button once to activate the self timer. You will have
ten seconds to get ready for your pose. The countdown number will be
displayed on the LCD as well followed by a beep sound.
Switch to the Right button once to activate the self timer. You will have
ten seconds to get ready for your pose. The countdown number will be
displayed on the LCD as well followed by a beep sound.
•
Shooting Continuously Setting
Pictures can be shoot in successive orders.
1.
Keep pressing the right button twice until Shooting Continuously icon appears
on the LCD Display.
on the LCD Display.
2.
Keep pressing the shutter button to activate Shooting Continuously. Then
release the shutter after the three sequences have been taken.
release the shutter after the three sequences have been taken.
Flash Off
The Flash will not fire.
Auto Red-eye
reduction
reduction
The Flash will fire depending
on the light source. Red eye
deduction will also be active
when needed. (Flash will
blink twice, picture will be
shot when the second flash is
fired.)
on the light source. Red eye
deduction will also be active
when needed. (Flash will
blink twice, picture will be
shot when the second flash is
fired.)
Flash Force On
The Flash always fire with
every shot.
every shot.
Night (Slow)
The camera extends the
mechanical shutter action,
and allow flash delay.
mechanical shutter action,
and allow flash delay.