Intel Desktop Board D945GRW KD945GRWLKPAK10 User Manual
Product codes
KD945GRWLKPAK10
Product Description
29
1.7 PCI Express* Connector
The board provides one PCI Express x16 connector supporting simultaneous transfer speeds up to
8 GBytes/sec.
8 GBytes/sec.
The PCI Express interface supports the PCI Conventional bus configuration mechanism so that the
underlying PCI Express architecture is compatible with PCI Conventional compliant operating
systems. Additional features of the PCI Express interface include the following:
underlying PCI Express architecture is compatible with PCI Conventional compliant operating
systems. Additional features of the PCI Express interface include the following:
• Support for the PCI Express enhanced configuration mechanism
• Automatic discovery, link training, and initialization
• Support for Active State Power Management (ASPM)
• SMBus 2.0 support
• Wake# signal supporting wake events from ACPI S1, S3, S4, or S5
• Software compatible with the PCI Power Management Event (PME) mechanism defined in the
• Automatic discovery, link training, and initialization
• Support for Active State Power Management (ASPM)
• SMBus 2.0 support
• Wake# signal supporting wake events from ACPI S1, S3, S4, or S5
• Software compatible with the PCI Power Management Event (PME) mechanism defined in the
PCI Power Management Specification Rev. 1.1
CAUTION
The PCI Express x16 connector on this board is intended for use with a PCI Express x16 riser card
only. Do not plug a PCI Express x16 add-in card into this connector. Doing so could damage both
the PCI Express x16 add-in card and the connector.
only. Do not plug a PCI Express x16 add-in card into this connector. Doing so could damage both
the PCI Express x16 add-in card and the connector.
1.8 IEEE-1394a Connector (Optional)
The optional IEEE-1394a interface addresses interconnection of both computer peripherals and
consumer electronics. The IEEE-1394a interface provides a throughput ranging from
100 Mbits/sec to 400 Mbits/sec. As a manufacturing option, the board includes one IEEE-1394a
front-panel connector.
consumer electronics. The IEEE-1394a interface provides a throughput ranging from
100 Mbits/sec to 400 Mbits/sec. As a manufacturing option, the board includes one IEEE-1394a
front-panel connector.
For information about
Refer to
The location of the front panel IEEE-1394a connector
The signal names of the front panel IEEE-1394a connector
Section 2.6.2.6, page 59