Enterasys 9f106-02 User Guide

Page of 25
 
1-1
 
Chapter 1
 
Introduction
 
The 9F106-02 (as shown in Figure 1-1) is an FDDI repeater module for the 
MMAC-Plus that provides external access to the Flexible Network Bus (FNB) 
backplane via two sets of FDDI-compliant A/B ports. This allows the FNB to 
traverse multiple MMAC-Plus systems, or connect to any ASNI FDDI-compliant 
device in an FDDI network. The 9F106-02 module attaches to both FDDI networks 
on the FNB backplane, FNB-1 and FNB-2, but can be controlled separately with 
local or remote management tools. Using standard FDDI chip-set technology, the 
9F106-02 module completely re-times and regenerates data signals for error free 
transmission and guaranteed interoperability.
 
Features
 
System Management
 
The 9F106-02 requires minimal management. It can be completely managed and 
controlled through the SMB-1. The management features include the following:
Front Panel Port Status
Insertion/bypass Control (FNB-1 and FNB-2) and Status
FPIM Identification (Front Panel)
 
Connectivity
 
The 9F106-02 uses FDDI Port Interface Modules (FPIMs) to provide several media 
options for the front panel (FNB-1 and FNB-2) interfaces. These FPIMs are 
available in various media types including the following:
Multimode Fiber Optic (FDDI MIC)
Single Mode Fiber Optic (FDDI MIC)
Unshielded Twisted Pair (RJ-45)
Shielded Twisted Pair (RJ-45)