Enterasys ssr-glx19-02 User Guide
CoreWatch User’s Manual
165
Chapter 11: Configuring the SSR for IPX Routes
a.
In the Available Port list, double-click the module containing the desired port.
From the list of available ports that appears, select the port that you want to bind
to the interface.
From the list of available ports that appears, select the port that you want to bind
to the interface.
b. Click the Add button.
Note:
You can bind only a single port to an interface. If you need to bind
multiple ports to the interface, create a VLAN consisting of those ports
and bind the interface to that VLAN.
multiple ports to the interface, create a VLAN consisting of those ports
and bind the interface to that VLAN.
12. Click Next.
The Apply ACLs panel appears.
Figure 91. Apply ACLs panel (single port)
13. Specify whether you want to apply an ACL to the interface by doing one of the
following.
–
To not apply an ACL, select No. Then click Finish, which completes the
configuration of the interface.
configuration of the interface.
Configuration Expert adds the new interface to those found in the IPX interfaces
bound to Ports object.
bound to Ports object.
–
To apply an ACL to the interface, select Yes and click Next.
Note:
You will be able to apply an IPX ACL while creating an interface only if
you previously created the ACL. If you plan to apply an ACL that you
have not defined yet, finish creating the interface. Then configure the
you previously created the ACL. If you plan to apply an ACL that you
have not defined yet, finish creating the interface. Then configure the