Enterasys ssr-glx19-02 User Guide

5.

From the Module drop-down list, select the module containing the port you want to 
configure.

6.

From the Port drop-down list, select the port you want to configure.

7.

In the Timeout box, enter the number of seconds that the SSR is to allow a learned 
MAC address to remain in the Layer-2 lookup table for the specified port. 

You can specify from 15 to 1,000,000 seconds. The default is 300 seconds.

8.

Click OK.

Disable aging on a port if you do not want the SSR to age MAC address entries in the 
port’s Layer-2 lookup tables.

Caution: 

Disabling aging on a port may eventually cause the port’s Layer-2 lookup tables 

to become full because the SSR will not remove MAC addresses from those tables.

To disable aging on a port:

1.

Start Configuration Expert if you have not already done so. 

2.

Open the configuration file you want to modify and then double-click that file’s 
Bridging Configuration object.

3.

Double-click the Aging Configuration object.