Enterasys mrxi-22 User Guide

3. Use the arrow keys to highlight the Traps field and enter Y (or y) to 

send alarms from the MRXI to the workstation, and N (or n) to prevent 
alarms from being sent.

4. Press the Return key.

5. Use the arrow keys to highlight the appropriate Trap IP Address 

field.

6. Enter the IP address of the workstation to send traps using this field. 

The format for this entry is XXX.XXX.XXX.XXX, with the value of 
XXX ranging from 0 to 255, and three dots, or else it returns to the 
beginning of the field.

7. Use the arrow keys to highlight the SAVE option and press Return (or 

press F6). The message “SAVED OK” appears.

Please note that if you attempt to exit the screen without saving your 
changes, a “NOT SAVED?” message appears. If you proceed to exit 
without saving, you will lose your edits.

8. To exit the Trap Table screen, press the appropriate Function key. To 

choose the Feature Selection screen, use the arrow keys to highlight 
the RETURN command and press the Return key. 

Alarms for these traps will now be sent to the designated IP addresses 
from the MRXI.

This section describes how you can use the SNMP Tools screen to access 
Management Information Bases (MIBs). Access to screen options 
depends on the access status accorded to your community name. This 
section describes super-user management capabilities.