Enterasys mrxi-22 User Guide
LOCAL MANAGEMENT
5-22
To walk through:
1. Highlight Walk, using the arrow keys, and press the Return key.
“<INITIAL> OID (=|F9)” appears.
2. Enter the OID (minus the prepend) and press the Return key. The
screen will begin walking through the sublayers of the MIB available
from the specified OID. Each OID listed displays the specified OID,
its size, its type, and the data it contains.
from the specified OID. Each OID listed displays the specified OID,
its size, its type, and the data it contains.
3. Press the Space Bar to stop the walk, or wait for “***MIB WALK
COMPLETED***” to appear on the screen.
To step through (you can step through only after a get next):
1. Highlight Step, using the arrow keys, and press the Return key.
“Specify OID” appears.
2. Enter the OID (only the suffix is necessary) and press Return. The
Tools screen will begin to scroll one OID at a time, through all of the
sublayers of the MIB available for that OID.
sublayers of the MIB available for that OID.
To cycle through:
1. Highlight CYCLES, using the arrow keys, and press the Return key.
2. Enter the number of cycles that you want to occur after “ENTER
CYCLE COUNT:” and press the Return key.
3. Enter how many seconds delay that you want between get next
requests after “ENTER CYCLE DELAY (secs):” and press the
Return key.
Return key.
5.7
COMMAND LINE INTERFACE (CLI)
The Command Line Interface (CLI) screen, Figure 5-10, will be
functional for future releases of the MRXI.
functional for future releases of the MRXI.