Enterasys 6000 User Guide
VLAN Redirect Configuration Screen
Port Configuration Menu Screens
6-23
6.7.1
Changing Source VLAN and Destination Ports
To add or delete source VLAN and destination port entries and set the Frame Format, proceed as
follows:
follows:
1. Use the arrow keys to highlight the Source VLAN field near the bottom of the screen.
2. Type in the VLAN ID number of the source VLAN to be configured.
3. Use the arrow keys to highlight the Destination Port field near the bottom of the screen.
4. Use the SPACE bar or BACKSPACE key to step to the appropriate port number for the
destination port.
5. Use the arrow keys to highlight the Frame Format field near the bottom of the screen.
6. Use the SPACE bar or BACKSPACE key to step to the appropriate frame format setting
(RECEIVED, TAGGED, or UNTAGGED) for the selected Destination Port.
7. Use the arrow keys to highlight the Status field.
8. Use the SPACE bar to select either the ADD or DEL (delete) option. Press ENTER. This adds
or deletes the selections for the Source VLAN, Destination Port, and Frame Format made in
steps 1 through 6 and also updates the screen.
steps 1 through 6 and also updates the screen.
9. Use the arrow keys to highlight SAVE at the bottom of the screen. Press ENTER. The message
“SAVED OK” displays. This saves the new settings and updates the Source Port and Destination
Port read-only fields.
Port read-only fields.
TIP: If more than 1 port is being redirected, repeat steps 1 through 8 for each additional
setting. Then go to step 9 to save all the new settings at once.
setting. Then go to step 9 to save all the new settings at once.
If an entry is to be changed, delete the entry, save the screen, then recreate the entry
with its new settings.
with its new settings.
NOTES: Any combination, up to 128 total, of port redirect instances can be configured
on the Port Redirect Configuration screen, and/or VLAN redirect instances on the VLAN
Redirect Configuration screen. Up to 24 instances can be configured as remote
instances to other modules in the chassis. Remote instances are instances that are
mapped from one module to another within the same chassis.
on the Port Redirect Configuration screen, and/or VLAN redirect instances on the VLAN
Redirect Configuration screen. Up to 24 instances can be configured as remote
instances to other modules in the chassis. Remote instances are instances that are
mapped from one module to another within the same chassis.
If the module has an optional ATM interface installed, ATM Permanent Virtual Circuits
(PVCs) redirect entries should also be considered as part of the 128 maximum redirect
entries for the module.
(PVCs) redirect entries should also be considered as part of the 128 maximum redirect
entries for the module.