Enterasys 6000 User Guide

3. To change the egress type on more than one port, repeat the first two steps for each port.

4. After the changes are complete, use the arrow keys to highlight the SAVE command at the 

bottom of the screen.

5. Press ENTER. The message “SAVED OK” displays and the settings are saved.

1. Use the arrow keys to highlight the SET ALL PORTS field. The following message appears at 

the top of the screen:

TOGGLE TO DESIRED SELECTION AND HIT <RETURN> TO PROPAGATE 
SELECTION TO PORTS

2. Press the SPACE bar to step to the appropriate egress type (UNTAGGED, TAGGED, or NO) 

and press ENTER. 

3. Use the arrow keys to highlight the SAVE command at the bottom of the screen.

4. Press ENTER. The message “SAVED OK” displays and the screen refreshes showing all ports 

associated with the VLAN that are set to the selected egress type.

Up to 32 ports can be displayed on the screen. If there are more than 32 ports associated with the 
VLAN, additional screens will contain the additional list of ports.

To display the additional port settings that do not display in the current screen, use the NEXT or 
PREVIOUS commands, as follows: 

1. To display the next screen, use the arrow keys to highlight NEXT. Press ENTER to view the 

entries on the next screen.

2. To display the previous screen, use the arrow keys to highlight PREVIOUS. Press ENTER to 

view the entries on the previous screen.

NOTE: The NEXT and PREVIOUS fields will only display if there are further egress lists 
to page through.