Enterasys 6000 User Guide
11-4
FRX/FRM 3. 3 User G uide, Rev 04
Configuring IP Interfaces
An IP interface allows the Internet Protocol to be executed over a frame relay, X.25,
or LAN port.
or LAN port.
To display all IP interfaces configured on the node, press
[A]
at the Configure LAN
Interfaces Menu (or
[A], [C], [F], [A]
from the
Main Menu
).
To configure an interface, press
[B]
at the Configure LAN Interfaces Menu. When
prompted, enter an interface number:
0–128
. (This is merely a sequential number to
identify the interface.)
Do not specify an interface number that has already been used
for an IPX interface, LLC2 interface, or Bridge port on this
node.
for an IPX interface, LLC2 interface, or Bridge port on this
node.
The display depends on the interface; the following figure shows an example, and
Table 11-2 (on page 11-5) lists the parameters for all interface types.
Table 11-2 (on page 11-5) lists the parameters for all interface types.
Figure 11-2 IP Interface Record Example
[A],[C], [F],[B]
from Main Menu
Nod e Name=n odexyz
I P Interface C onfiguration
*
Interface N umber:–10
A
Maximum Tran smission Un it
4096
B
Network Mask
255.0.0.0
C
Routing Metric Coun t
0
D
ICMP Redirects
Y
E
RIP Flash Up dates (s ec)
60
F
RIP Full U pdates (sec)
120
G Priority
5
H Bandw id th A llocation Group
1
I
Interface Typ e
FRL
J
Source IP A ddress
100.100.2.2
K Destination I P Ad dres s
100.100.2.1
L
Source Card
0
M Source Port
0
N
Source DLCI
16
Option: