Enterasys 6000 Reference Guide

 

9G426-02 Module Specific Information

4

 

The following information briefly explains each General Configuration Screen 
field.

 

Displays the serial number of the selected module.

 

Displays the version number of the selected module.

 

Displays the amount (megabytes) of flash memory in the selected module.

 

Contains a value that the module recognizes as the current date. To enter a new 
date, highlight the field and enter the date in MM/DD/YYYY format. The month 
and day portion of the date must include two digits. Therefore, enter a leading 
zero for months January through September, and for dates less than 10. For 
example, for June 4, 1996, enter 06/04/1996 (slashes are optional). If you do not 
enter slashes to separate the month, day, and year values, the first eight digits you 
enter in this field represent an entry (i.e., 06041996).

 

Contains a value that the module recognizes as the current time. To enter a new 
time, highlight the field and enter the time in HH:MM:SS format. Notice that 
there is no AM/PM indicator. Time should be entered based upon a 24 hour clock. 
For 4:07 p.m., enter 16:07:00 (colons are optional). If you do not enter colons to 
separate the hours, minutes, and seconds values, the first six digits you enter in 
this field represent an entry (i.e., 160700). For 6:12 a.m., enter 6:12:00 or 061200.

 

Contains the rate at which the module’s screens are updated. This setting 
determines how frequently (in seconds) information is updated on the screen. To 
enter a new refresh rate, highlight the field and enter a number. The 

 

 

refresh rate is 3 seconds. The 

 

 is 3 - 99 seconds.