Enterasys 1805 User Guide
48 ELS100-S24TX2M User Interface
ELS100-S24TX2M
Configuring Bridge MIB Extensions
The Bridge MIB includes extensions for managed devices that support
Traffic Classes, Multicast Filtering and Virtual LANs. To configure these
extensions, use the Extended Bridge Configuration screen as shown
below:
Figure 2-29. Extended Bridge Configuration
SmartSTACK Local Management -- ELS100-S24TX2M
Extended Bridge Configuration
Bridge Capability : (Read Only)
Extended Multicast Filtering Services: NO
Traffic Classes
Traffic Classes
: YES
Static Entry Individual Port
: YES
VLAN Learning
: SVL
Configurable PVID Tagging
: YES
Local VLAN Capable
: NO
Bridge Settings :
Traffic C lass
: FALSE
GMRP
: DISABLED
GVRP
: DISABLED
<APPLY> < OK> <CANCEL>
Use <TAB> or arrow keys to move. <Space> to scroll options.
Parameter
Description
Bridge Capability
Extended Multicast
Filtering Services
Filtering Services
Enables filtering of individual multicast addresses based on
GMRP (GARP Multicast Registration Protocol). Note that this
function is not available for the current firmware release.
GMRP (GARP Multicast Registration Protocol). Note that this
function is not available for the current firmware release.
Traffic Classes
Provides mapping of user priorities to multiple traffic classes.
(Refer to 802.1P Configuration.)
(Refer to 802.1P Configuration.)
Static Entry
Individual Port
Individual Port
Enables static filtering for unicast and multicast addresses.
(Refer to Network Monitor Menu / Static Unicast Address Table
Configuration and Static Multicast Address Table Configuration.)
(Refer to Network Monitor Menu / Static Unicast Address Table
Configuration and Static Multicast Address Table Configuration.)
VLAN Learning
This switch uses Shared VLAN Learning (SVL), whereby all ports
share one VLAN filtering database.
share one VLAN filtering database.
Configurable
PVID Tagging
PVID Tagging
Allows you to override the default PVID setting (Port VLAN ID
used in frame tags) and its egress status (VLAN-Tagged or
Untagged) on each port. (Refer to 802.1Q VLAN Port
Configuration.)
used in frame tags) and its egress status (VLAN-Tagged or
Untagged) on each port. (Refer to 802.1Q VLAN Port
Configuration.)
Local VLAN
Capable
Capable
This switch does not support multiple local bridges (that is,
multiple Spanning Trees).
multiple Spanning Trees).