Enterasys 6000 Reference Guide
MI B Ref erence
109
an existing conceptual row.
Note that all of the above values may be specified in a man-
agement protocol set operation, and only the
agement protocol set operation, and only the
active
value
will be returned in response to a management protocol
retrieval operation. For a management protocol set opera-
tion, if other variable bindings are included in the same
PDU, then a
retrieval operation. For a management protocol set opera-
tion, if other variable bindings are included in the same
PDU, then a
genErr
response is returned.
::= { nlLlc2TermConnectionTable.1.5 }
nlLlc2OrigConnectionTable (LLC2.3)
nlLlc2OrigConnectionSequence
SYNTAX:
INTEGER (
1–16
)
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:LLC2 Host connection sequence number (a simple
identifier for each entry).
::= { nlLlc2OrigConnectionTable.1.1}
nlLlc2OrigConnectionHSAP
SYNTAX:
INTEGER (
4–254
)
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:Service Access Point address used to connect to the host.
This must match the SSAP (source SAP) in a frame
received from the local LAN or the DSAP (destination
SAP) in a frame from the remote link station.
received from the local LAN or the DSAP (destination
SAP) in a frame from the remote link station.
::= { nlLlc2OrigConnectionTable.1.2}
nlLlc2OrigConnectionType
SYNTAX:
INTEGER {
1
(SDLC),
2
(LLC2)}
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:Remote subscriber device type.
::= { nlLlc2OrigConnectionTable.1.3}
::= { nlLlc2OrigConnectionTable.1.3}
nlLlc2OrigConnectionLocalSubscriberId
SYNTAX:
NlSubscriberAddress
ACCESS:
Read/Write
STATUS:
Mandatory