Enterasys 6000 Reference Guide
156
Cabletron Relay Access Products
this metric are determined by the routing protocol
specified in the route's
specified in the route's
value. If this metric is
not used, its value should be set to
-1
.
::= { ip.21.1.12 }
ipRouteInfo
SYNTAX:
OBJECT IDENTIFIER
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:Reference to MIB definitions specific to the particular
routing protocol which is responsible for this route, as
determined by the value specified in the route's
determined by the value specified in the route's
value. If this information is not present, its
value should be set to the OBJECT IDENTIFIER {
0 0
},
which is a syntatically valid object identifier, and any
conformant implementation of ASN.1 and BER must be
able to generate and recognize this value.
conformant implementation of ASN.1 and BER must be
able to generate and recognize this value.
::= { ip.21.1.13 }
IP Address Translation Table (ip.22)
The IP address translation table contain the IpAddress-to-physical address equiva-
lences. Some interfaces do not use translation tables for determining address equiva-
lences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type,
then the Address Translation table is empty; i.e., it has zero entries.
lences. Some interfaces do not use translation tables for determining address equiva-
lences (e.g., DDN-X.25 has an algorithmic method); if all interfaces are of this type,
then the Address Translation table is empty; i.e., it has zero entries.
ipNetToMediaIfIndex
SYNTAX:
INTEGER
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:Interface on which this entry's equivalence is effective.
The interface identified by a particular value of this index
is the same interface as identified by the same value of
is the same interface as identified by the same value of
ifIndex
.
::= { ip.22.1.1 }
ipNetToMediaPhysAddress
SYNTAX:
PhysAddress
ACCESS:
Read/Write
STATUS:
Mandatory