Enterasys 6000 Reference Guide
MI B Ref erence
25
portFrBackupUseOnly
SYNTAX:
INTEGER {no (1), yes (2)}
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:Determines whether all DLCIs on the port will be reserved
exclusively as backups for other DLCIs in the same node.
If yes is specified for this object, the port will remain dis-
abled until needed for backup
If yes is specified for this object, the port will remain dis-
abled until needed for backup
::= { portFrConfigTable.1.15 }
portDLCIConfigTable (portFrGroup.2)
This table contains information about DCLIs configured on a frame relay port. Note
that deleting a DLCI entry does not affect the existence of the DLCI for the protocol
running on the port. The DLCI record is removed from the database file, but will
remain known to the node until it is rebooted. This is consistent with the way DLCI
information is handled when configuring through the user-interface menu system.
that deleting a DLCI entry does not affect the existence of the DLCI for the protocol
running on the port. The DLCI record is removed from the database file, but will
remain known to the node until it is rebooted. This is consistent with the way DLCI
information is handled when configuring through the user-interface menu system.
portDLCIRlpIndex
SYNTAX:
INTEGER (
1-8
, which correspond to actual RLP numbers
0–7
)
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:RLP on which the DLCI is located.
::= { portDLCIConfigTable.1.1}
::= { portDLCIConfigTable.1.1}
portDLCIPortIndex
SYNTAX:
INTEGER (
1–64
, where
1–8
correspond to physical port
numbers
0–7
and
9–64
correspond to logical port numbers
8–63
.)
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:Port number on which the DLCI is located.
::= { portDLCIConfigTable.1.2}
::= { portDLCIConfigTable.1.2}
portDLCIIndex
SYNTAX:
INTEGER (
16–991
)
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:DLCI number used to identify the entry in the table.
::= { portDLCIConfigTable.1.3}
::= { portDLCIConfigTable.1.3}