Enterasys 6000 Reference Guide
60
Cabletron Relay Access Products
lsSdlcLlc2OperTable (portSdlcGroup.6)
This table contains Read only variables that reflect the actual operating parameter
values. Unless a value was changed in the
values. Unless a value was changed in the
lsSdlcLlc2AdminTable
after the interface
became operational, the values in the
lsSdlcllc2OperTable
should match those con-
figured in the
lsSdlcLlc2AdminTable
. The variables in the
lsSdlcLlc2OperTable
are listed
below.
lSSdlcLlc2OperLocalSap
(lsSdlcLlc2OperTable.1.1)
lSSdlcLlc2OperLocalMac
(lsSdlcLlc2OperTable.1.2)
lSSdlcLlc2OperIdblk
(lsSdlcLlc2OperTable.1.3)
lSSdlcLlc2OperIdnum
(lsSdlcLlc2OperTable.1.4)
lSSdlcLlc2OperLanTi
(lsSdlcLlc2OperTable.1.5)
lSSdlcLlc2OperLanT1
(lsSdlcLlc2OperTable.1.6)
lSSdlcLlc2OperLanT2
(lsSdlcLlc2OperTable.1.7)
lSSdlcLlc2OperLanN2
(lsSdlcLlc2OperTable.1.8)
lSSdlcLlc2OperLanN3
(lsSdlcLlc2OperTable.1.9)
lSSdlcLlc2OperLanTw
(lsSdlcLlc2OperTable.1.10)
lSSdlcLlc2OperBAG
(lsSdlcLlc2OperTable.1.11)
lSSdlcLlc2OperPriority
(lsSdlcLlc2OperTable.1.12)
lSSdlcLlc2AdminSuppressXID
(lsSdlcLlc2OperTable.1.13)
portT1Group (port.7)
portT1AdminTable (portT1Group.1)
portT1AdminBlockedPortFlag
STATUS:
INTEGER {no (
1
), yes (
2
)}
ACCESS:
read-write
STATUS:
Mandatory
DESCRIPTION: Flag which when set, means the port will not be enabled
after a boot-up of the node.
::= {portT1AdminTable.1.1}
portT1AdminGenerateClock
STATUS:
INTEGER {no (
1
), yes (
2
) }
ACCESS:
read-write
STATUS:
Mandatory
DESCRIPTION:Determines whether the port will generate the clock
necessary to synchronize traffic over the link.
::= {portT1AdminTable.1.2}