Enterasys 6000 Reference Guide
86
Cabletron Relay Access Products
nlIfIpInterfaces (nlInterfaces.4)
nlIfIpTable (nlIfIpIInterfaces.1)
This table defines IP interfaces over frame relay, X.25, or LAN (Ethernet, 802.3,
802.5).
802.5).
nlIfIpInterface
SYNTAX:
INTEGER (
1–257
)
ACCESS:
Read only
STATUS:
Mandatory
DESCRIPTION:Interface number that uniquely identifies the interface to
which this entry is applicable. The interface identified by a
particular value of this number is NOT the same interface
defined by the same value of MIB-II System Group
variable
particular value of this number is NOT the same interface
defined by the same value of MIB-II System Group
variable
(
interfaces.2.1.1
).
::= { nlIfIpTable.1.1 }
nlIfIpMtu
SYNTAX:
INTEGER (
1–4096
)
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:Maximum size (in bytes) of the data field that can be used
to encapsulate an IP datagram for transmission over the
interface. If the interface type is LAN-based, the maximum
size cannot exceed 1500.
interface. If the interface type is LAN-based, the maximum
size cannot exceed 1500.
::= { nlIfIpTable.1.2 }
nlIfIpNetworkMask
SYNTAX:
IpAddress
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:Mask used during routing to determine the portion of the
address associated with the network.
::= { nlIfIpTable.1.3 }
nlIfIpRouteMetric
SYNTAX:
INTEGER (
0–255
)
ACCESS:
Read/Write
STATUS:
Mandatory
DESCRIPTION:The number of network hops (network gateways in the