Fujitsu Primergy RX100 S5 VFY:R1005SP090ES Data Sheet

 Fujitsu PRiMERGY RX100 s5 Mono sockEt intEl

®

 XEon

®

 1 u Rack sERvER 

Page 3 / 7

Rack

Rack

3.5” SATA 

3.5” SAS/SATA

d 2542

intel

®

 3210

1 x Intel

®

 core™2 duo / intel

®

 Pentium

®

 dual-core processor / intel

®

 Xeon

®

 processor 3000 sequence

4 (2 banks with 2 DIMMs each)

DIMM (DDR2)

1 Gb - 8 Gb

advanced Ecc

Dual channel support. For dual channel performance, a minimum of 2 memory modules have to be ordered. Capacity per 
channel has to be the same.

4 GB (1 module(s) 4 GB) DDR2, unbuffered, ECC, 800 MHz, PC2-6400
2 GB (1 module(s) 2 GB) DDR2, 800 MHz, PC2-6400
1 GB (1 module(s) 1 GB) DDR2, 800 MHz, PC2-6400

A BIOS update can be necessary for a memory and processor upgrade.

5  x (2x front, 2x back, 1x internal)

1  x VGA (15-pin)

1  x serial RS-232-C,  usable for iRMC or system or shared

2

2 x Gbit/s Ethernet

1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s) 
Service LAN traffic can be switched to shared onboard Gbit LAN port

SATA (for 1x CD-RW / DVD / DVD-RW)

BCM 5715, 2 x 10/100/1000 Mbit/s Ethernet (TCP/IP acceleration), PXE-Boot via LAN from PXE server, iSCSI Boot (also 
diskless) via onboard LAN

Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller), IPMI 2.0 
compatible

Standard, optional deselectable

2 port SATA with RAID 0/1for HDDs

4 port for internal SAS HDDs, with RAID 0/1 for Windows 
and Linux

2-port SATA 300 with RAID 0, 1

for easy change SATA hard disks (hot-plug opt.)

2 x low profile (one of these can be used as standard short, 175mm)

2

1 x 5.25/0.5-inch for CD-RW/DVD
1 x 3.5/0.5-inch for ServerView Local Service Panel

2 x 3.5-inch easy change SATA

2 x 3.5-inch hot-plug SAS/SATA

2 x 3.5-inch hot-plug SATA 

-