Sony VPL-CX70 Operating Guide

Page of 54
28
The INPUT SETTING Menu
Note that if the projector is used for profit or for public viewing, modifying the original picture by 
switching to the wide mode may constitute an infringement of the rights of authors or producers, 
which are legally protected.
This projector has 45 types of preset data for 
input signals (the preset memory). When a 
preset signal is input, the projector 
automatically detects the signal type and 
recalls the data for the signal from the preset 
memory to adjust it to an optimum picture. 
The memory number and signal type of that 
signal are displayed on the INFORMATION 
menu (See page 34). You can also adjust the 
preset data through the INPUT SETTING 
menu.
This projector has 20 types of user memories 
for Input-A into which you can save the 
setting of the adjusted data for an unpreset 
input signal.
When an unpreset signal is input for the first 
time, a memory number is displayed as 0. 
When you adjust the data of the signal using 
the INPUT SETTING menu, it will be 
registered in the projector. If more than 20 
user memory items are registered, the 
newest memory always overwrites the oldest 
one.
See the chart on page 46 to find if the signal 
is registered in the preset memory.
Since the data for the following signals is 
recalled from the preset memory, you can 
use these preset data items by adjusting “H 
Size.” Make finer adjustments by adjusting 
“Shift.”
When the aspect ratio of input signal is other 
than 4:3, a part of the screen is displayed in 
black.
Shift
Adjusts the position of the picture. H adjusts the 
horizontal position of the picture.V adjusts the vertical 
position of the picture. As the setting for H increases, 
the picture moves to the right, and as the setting 
decreases, the picture moves to the left. 
As the setting for V increases, the picture moves up, 
and as the setting decreases, the picture moves down. 
Use the 
< or the , key to adjust the horizontal 
position and the 
M and m key for the vertical position.
Set according to 
the input signal
Scan Converter
Converts the signal to display the picture according to 
the screen size.
When set to “Off,” displays the picture while matching 
one pixel of input picture element to that of the LCD. 
The picture will be clear but the picture size will be 
smaller.
On
Setting items
Functions
Initial setting
Note
About the Preset Memory No.
Signal
Memory No.
SIZE
Super Mac-2
23
1312
SGI-1
23
1320
Macintosh 19"
25
1328
Macintosh 21"
27
1456
Sony News
36
1708
PC-9821
1280 × 1024
36
1600
WS Sunmicro
37
1664
Note