Sony VPL-CX70 User Guide
GB
20
Connecting the Projector
Connecting the
Projector
Projector
When you connect the projector,
make sure to:
make sure to:
• Turn off all equipment before making any
connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; loose
• Insert the cable plugs firmly; loose
connections may increase noise and
reduce performance of picture signals.
When pulling out a cable, be sure to pull it
out from the plug, not the cable itself
reduce performance of picture signals.
When pulling out a cable, be sure to pull it
out from the plug, not the cable itself
When connecting to a wireless LAN by using
the Air Shot, see “Operating Instructions for
Air Shot” contained in the CD-ROM (VPL-
CX75 only).
the Air Shot, see “Operating Instructions for
Air Shot” contained in the CD-ROM (VPL-
CX75 only).
This section describes how to connect the
projector to a computer.
For more information, refer to the
computer’s instruction manual.
projector to a computer.
For more information, refer to the
computer’s instruction manual.
To connect a computer
1
USB cable (supplied)
(Connect the USB cable to use a wireless
mouse.)
(Connect the USB cable to use a wireless
mouse.)
2
HD D-sub 15-pin cable (supplied)
3
Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
• The projector accepts VGA, SVGA, XGA,
SXGA and SXGA+ signals. However, we
recommend that you set the output mode of
your computer to XGA mode for the external
monitor.
recommend that you set the output mode of
your computer to XGA mode for the external
monitor.
• If you set your computer, such as a notebook
type, to output the signal to both your
computer’s display and the external monitor,
the picture of the external monitor may not
computer’s display and the external monitor,
the picture of the external monitor may not
Connecting with a Computer
Notes
AUDIO
STD/DUO
S VIDEO
INPUT A
VIDEO
1
2
3
to USB
connector
Left side
to monitor
output
Computer
to audio output