Nokia 6822 Quick Setup Guide

Thank you for purchasing the Nokia 6822 messaging device. 
This Quick Start Guide will help you get started with your new 
device quickly and easily. This guide covers only the basics. It is 
highly recommended that you review the Getting Started 
CD-ROM included in the sales package. 

Your Nokia 6822 messaging device uses a convenient SIM card (fig. 2.1)
that holds information about your wireless service and contact information. 
If you already have a SIM card, you can transfer your service and contacts 
to your new phone by simply inserting the SIM. If you do not have a SIM 
card or service for the phone, contact your wireless provider.

Follow the directions below if your phone displays “Insert SIM card” (fig. 2.2).
 

1.  Turn the phone off and remove the back cover by pushing

 

 

the release button toward the bottom of the phone, at the

 

 

same time, lifting the back cover away from the phone.

 

2.  Lift and remove the back cover (fig. 2.3).

 

3.  Lift the SIM card holder up (fig. 2.4).

 

4.  Insert the SIM card into the slot. Make sure the gold

 

 

contacts are facing down and the beveled corner is

 

 

pointed towards the bottom of the phone (fig. 2.5).

 

5.  Close the SIM card slot.

 

6.  Slide the SIM card to the left and lock it.

 

 

You should hear it click into place.

Take a moment to look through your Nokia 6822 messaging device sales packet. 
Please make sure the following components are included:

1.  Nokia 6822 messaging device

2.  Nokia Battery BL-5C (850 mAh Li-Ion)

3.  Nokia Travel Charger ACP-12

4.  Headset HS-5

5.  Nokia 6822 Getting Started CD-ROM

6.  Nokia 6822 User Guide

7.  Nokia 6822 Application Guide

The Nokia BL-5C battery is inserted under the back cover. This Li-Ion 850 mAh battery provides power in a 
lightweight package. A fully charged battery has up to 8 hours of talk time and up to 14 days of standby time.

After you have inserted the SIM card (see above), follow the steps below to insert and charge your battery.

 

1.  Slide the battery into the back cover as shown (fig. 3.1).  

 

2.  Replace the back cover.

 

3.  Plug the Nokia ACP-12 charger into a standard AC wall outlet.

 

4.  Connect the charger cable to the bottom of the Nokia 6822 device (fig. 3.2).  

Recharging time is approximately one hour and thirty minutes while 
the phone is in standby mode.  While charging is in progress, the 
battery charge indicator scrolls on the phone display. You can use 
phone and messaging functions while charging is in progress. When
the battery is fully charged, the charge indicator stops scrolling.

Note: The first time the battery is charged, allow the battery to fully 
charge before using your device.

7.

4.

3.

1.

All screen images are simulated.

5.

2.

9239111

6.