Seiko Instruments 7954 User Guide
InkNote Manager by Seiko Instruments
103
SmartPad Maintenance Procedures
2.
Insert the batteries into the battery compartment. Be sure the positive (+)
end of both batteries points toward the bottom of the portfolio.
end of both batteries points toward the bottom of the portfolio.
3.
Replace the battery cover and slide it into place.
Used batteries are hazardous waste and should be disposed of appropriately.
Repositioning the SmartPad2 Infrared Transceiver
As shipped, SmartPad2 is set to work with handhelds that have the infrared
port located on the top edge of the handheld. (The original SmartPad works
only with such handhelds.) On some handhelds, the infrared port is located
on the left side. To use SmartPad2 with handhelds that have an infrared port
on the left side, you must reposition SmartPad’s infrared transceiver. To
reposition the transceiver:
port located on the top edge of the handheld. (The original SmartPad works
only with such handhelds.) On some handhelds, the infrared port is located
on the left side. To use SmartPad2 with handhelds that have an infrared port
on the left side, you must reposition SmartPad’s infrared transceiver. To
reposition the transceiver:
1.
Pull to remove the round cap on the transceiver.
See Also
Press down
here and slide
to remove
here and slide
to remove
Battery compartment
Cover removed