TiVo Series2 Quick Setup Guide

Before you begin: You will be using this 
diagram for VCR connections only 
(highlighted in red). You must complete 
Option A (p. 3) or Option B (pp. 4-5) before 
connecting a VCR. 

The Installation Guide contains additional 
pictures of completed VCR setups (with and 
without a cable or satellite box, and for a TV 
with only one input).

 Connect DVR to VCR

Connect an RF Coaxial cable from the RF Out 
connector on the DVR to the Antenna In 
connector on the VCR.

 Connect VCR to TV

Connect another RF Coaxial cable from the 
RF Out connector on the VCR to the Antenna 
In connector on the TV. 

[If your TV only has one input, see the 
Installation Guide for the appropriate setup 
including a VCR.]

 Tune TV (if necessary) to see the  

Press the Input, Source, or TV/Video button 
on your TV until the Welcome screen is 
displayed. Now you’re ready to begin 
Guided Setup.

Your TiVo DVR usually does not change the 
way you connect a DVD player to your TV. 
Connect the audio/video cable that came 
with your DVD player from the DVD player’s 
audio/video output to the audio/video 
input on the TV. To add both a DVD player 
(or game console) and a VCR, see the 
setups in the Installation Guide.

Press the Input, Source, or TV/Video button 
on your TV until you see channel numbers 
displayed. Then use the buttons on the 
front of your TV to go to channel 3 or 4, 
depending on how the Channel 3/4 switch 
on your VCR is set.

Complete Option A (p. 3) or 

Option B (pp. 4-5).

120 V~60Hz

0.75A

 

 

 

 

 

 

 

 

 

 

 

®